0x1949 Team - FAZEMRX - MANAGER

Edit File: ubuntu-pro-client.postinst

#!/bin/sh

set -e

. /etc/os-release  # For VERSION_ID

# Needed even if this script doesn't call debconf, see:
# https://lintian.debian.org/tags/postinst-does-not-load-confmodule.html
# Note: this may re-exec the postinst script.
. /usr/share/debconf/confmodule

if [ -z "${VERSION_ID}" ]; then
    echo "Warning: missing VERSION_ID in /etc/os-release" >&2
    VERSION_ID="NO-VERSION_ID"
fi

XENIAL_CLOUD_ID_SHIM_UNIT_LOCATION="/etc/systemd/system/multi-user.target.wants/ubuntu-advantage-cloud-id-shim.service"

NOTICES_DIR="/var/lib/ubuntu-advantage/notices"
TEMP_NOTICES_DIR="/run/ubuntu-advantage/notices"
REBOOT_CMD_MARKER_FILE="/var/lib/ubuntu-advantage/marker-reboot-cmds-required"

#
# Helpers that change state of pro-client
#
add_notice() {
    notice=$1
    mkdir -p $NOTICES_DIR
    touch $NOTICES_DIR/$notice
}
add_temp_notice() {
    notice=$1
    mkdir -p $TEMP_NOTICES_DIR
    touch $TEMP_NOTICES_DIR/$notice
}
mark_reboot_cmds_as_needed() {
    if [ ! -f "$REBOOT_CMD_MARKER_FILE" ]; then
      touch $REBOOT_CMD_MARKER_FILE
    fi
}

case "$1" in
    configure)
      PREVIOUS_PKG_VER=$2

#
      # Migrations from previous ubuntu-pro-client package versions.
      # These all exist in postinst-migrations.sh.
      # See the explanation in that file.
      # Do not add additional version migrations directly in this file.
      #

if dpkg --compare-versions "$PREVIOUS_PKG_VER" ge "31~"; then
          /usr/lib/ubuntu-advantage/postinst-migrations.sh $PREVIOUS_PKG_VER
      fi

#
      # do-release-upgrade migrations from previous Ubuntu release ubuntu-pro-client package versions
      #

# Xenial -> Bionic: clean up unnecessary cloud-id-shim unit that is only in xenial packages
      if [ "$VERSION_ID" = "18.04" ]; then
          if echo "$PREVIOUS_PKG_VER" | grep -q "16.04"; then
              if [ -L $XENIAL_CLOUD_ID_SHIM_UNIT_LOCATION ]; then
                  deb-systemd-helper purge ubuntu-advantage-cloud-id-shim.service > /dev/null || true
                  deb-systemd-helper unmask ubuntu-advantage-cloud-id-shim.service > /dev/null || true
              fi
          fi
      fi

#
      # Always do these to ensure ubuntu-pro-client is in correct state
      #

/usr/lib/ubuntu-advantage/cloud-id-shim.sh || true

if grep -q "^ua_config:" /etc/ubuntu-advantage/uaclient.conf; then
          echo "Warning: uaclient.conf contains old ua_config field." >&2
          echo "         Please do the following:" >&2
          echo "         1. Run 'sudo pro config set field=value' for each field/value pair" >&2
          echo "            present under ua_config in /etc/ubuntu-advantage/uaclient.conf" >&2
          echo "         2. Delete ua_config and all sub-fields in" >&2
          echo "            /etc/ubuntu-advantage/uaclient.conf" >&2
      fi
      ;;
esac

# Automatically added by dh_apparmor/3.0.4-2ubuntu2.4
if [ "$1" = "configure" ]; then
    APP_PROFILE="/etc/apparmor.d/ubuntu_pro_apt_news"
    if [ -f "$APP_PROFILE" ]; then
        # Add the local/ include
        LOCAL_APP_PROFILE="/etc/apparmor.d/local/ubuntu_pro_apt_news"

test -e "$LOCAL_APP_PROFILE" || {
            mkdir -p `dirname "$LOCAL_APP_PROFILE"`
            install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
        }

# Reload the profile, including any abstraction updates
        if aa-enabled --quiet 2>/dev/null; then
            apparmor_parser -r -T -W "$APP_PROFILE" || true
        fi
    fi
fi
# End automatically added section
# Automatically added by dh_apparmor/3.0.4-2ubuntu2.4
if [ "$1" = "configure" ]; then
    APP_PROFILE="/etc/apparmor.d/ubuntu_pro_esm_cache"
    if [ -f "$APP_PROFILE" ]; then
        # Add the local/ include
        LOCAL_APP_PROFILE="/etc/apparmor.d/local/ubuntu_pro_esm_cache"

test -e "$LOCAL_APP_PROFILE" || {
            mkdir -p `dirname "$LOCAL_APP_PROFILE"`
            install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
        }

# Automatically added by dh_python3
if command -v py3compile >/dev/null 2>&1; then
	py3compile -p ubuntu-pro-client:amd64 
fi
if command -v pypy3compile >/dev/null 2>&1; then
	pypy3compile -p ubuntu-pro-client:amd64  || true
fi

# End automatically added section
# Automatically added by dh_systemd_enable/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# This will only remove masks created by d-s-h on package removal.
	deb-systemd-helper unmask 'ua-reboot-cmds.service' >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'ua-reboot-cmds.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'ua-reboot-cmds.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'ua-reboot-cmds.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# This will only remove masks created by d-s-h on package removal.
	deb-systemd-helper unmask 'ua-timer.timer' >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'ua-timer.timer'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'ua-timer.timer' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'ua-timer.timer' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_enable/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# This will only remove masks created by d-s-h on package removal.
	deb-systemd-helper unmask 'ubuntu-advantage.service' >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'ubuntu-advantage.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'ubuntu-advantage.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'ubuntu-advantage.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_start/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -z "${DPKG_ROOT:-}" ] && [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		deb-systemd-invoke start 'ua-timer.timer' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_systemd_start/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -z "${DPKG_ROOT:-}" ] && [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		deb-systemd-invoke start 'ubuntu-advantage.service' >/dev/null || true
	fi
fi
# End automatically added section

exit 0