0x1949 Team - FAZEMRX - MANAGER

Edit File: clamav-daemon.postinst

#! /bin/sh
# postinst script for clamav-daemon
#
# see: dh_installdeb(1)

set -e

# summary of how this script can be called:
#        * <postinst> `configure' <most-recently-configured-version>
#        * <old-postinst> `abort-upgrade' <new version>
#        * <conflictor's-postinst> `abort-remove' `in-favour' <package>
#          <new-version>
#        * <deconfigured's-postinst> `abort-deconfigure' `in-favour'
#          <failed-install-package> <version> `removing'
#          <conflicting-package> <version>
# for details, see http://www.debian.org/doc/debian-policy/ or
# the debian-policy package
#
# quoting from the policy:
#     Any necessary prompting should almost always be confined to the
#     post-installation script, and should be protected with a conditional
#     so that unnecessary prompting doesn't happen if a package's
#     installation fails and the `postinst' is called with `abort-upgrade',
#     `abort-remove' or `abort-deconfigure'.

#loading debconf module
. /usr/share/debconf/confmodule

to_lower()
{
  word="$1"
  lcword=$(echo "$word" | tr A-Z a-z)
  echo "$lcword"
}

is_true()
{
  var="$1"
  lcvar=$(to_lower "$var")
  [ 'true' = "$lcvar" ] || [ 'yes' = "$lcvar" ] || [ 1 = "$lcvar" ]
  return $?
}

is_false()
{
  var="$1"
  lcvar=$(to_lower "$var")
  [ 'false' = "$lcvar" ] || [ 'no' = "$lcvar" ] || [ 0 = "$lcvar" ]
  return $?
}

ucf_cleanup()
{
  # This only does something if I've fucked up before
  # Not entirely impossible :(

configfile=$1

if [ `grep "$configfile" /var/lib/ucf/hashfile | wc -l` -gt 1 ]; then
    grep -v "$configfile" /var/lib/ucf/hashfile > /var/lib/ucf/hashfile.tmp
    grep "$configfile" /var/lib/ucf/hashfile | tail -n 1  >> /var/lib/ucf/hashfile.tmp
    mv /var/lib/ucf/hashfile.tmp /var/lib/ucf/hashfile
  fi
}

add_to_ucf()
{
  configfile=$1
  ucffile=$2

if ! grep -q "$configfile" /var/lib/ucf/hashfile; then
    md5sum $configfile >> /var/lib/ucf/hashfile
    cp $configfile $ucffile
  fi
}

ucf_upgrade_check()
{
  configfile=$1
  sourcefile=$2
  ucffile=$3

if [ -f "$configfile" ]; then
    add_to_ucf $configfile $ucffile
    ucf --three-way --debconf-ok "$sourcefile" "$configfile"
  else
    [ -d /var/lib/ucf/cache ] || mkdir -p /var/lib/ucf/cache
    pathfind restorecon && restorecon /var/lib/ucf/cache
    cp $sourcefile $configfile
    add_to_ucf $configfile $ucffile
  fi
}

slurp_config()
{
  CLAMAVCONF="$1"
  
  if [ -e "$CLAMAVCONF" ]; then
    for variable in `egrep -a -v '^[[:space:]]*(#|$)' "$CLAMAVCONF" | awk '{print $1}'`; do
      case "$variable" in
        DatabaseMirror)
        if [ -z "$DatabaseMirror" ]; then
          for i in `grep -a ^$variable $CLAMAVCONF | awk '{print $2}'`; do
            value="$value $i"
          done
        else
          continue
        fi
        ;;
        DatabaseCustomURL)
        if [ -z "$DatabaseCustomURL" ]; then
          for i in `grep -a ^$variable $CLAMAVCONF | awk '{print $2}'`; do
            value="$value $i"
          done
        else
          continue
        fi
        ;;
        IncludePUA)
        if [ -z "$IncludePUA" ]; then
          for i in `grep -a ^$variable $CLAMAVCONF | awk '{print $2}'`; do
            value="$i $value"
          done
        else
          continue
        fi
        ;;
        ExcludePUA)
        if [ -z "$ExcludePUA" ]; then
          for i in `grep -a ^$variable $CLAMAVCONF | awk '{print $2}'`; do
            value="$i $value"
          done
        else
          continue
        fi
        ;;
        ExtraDatabase)
        if [ -z "$ExtraDatabase" ]; then
          for i in `grep -a ^$variable $CLAMAVCONF | awk '{print $2}'`; do
            value="$value $i"
          done
        else
          continue
        fi
        ;;
        VirusEvent|OnUpdateExecute|OnErrorExecute|RejectMsg)
        value=`grep -a ^$variable $CLAMAVCONF | head -n1 | sed -e s/$variable\ //`
        ;;
        *)
        value=`grep -a "^$variable[[:space:]]" $CLAMAVCONF | head -n1 | awk '{print $2}'`
        ;;
      esac
      if [ -z "$value" ]; then 
        export "$variable"="true"
      elif [ "$value" != "$variable" ]; then
        export "$variable"="$value"
      else
        export "$variable"="true"
      fi
      unset value
    done
  fi
}

pathfind() {
  OLDIFS="$IFS"
  IFS=:
  for p in $PATH; do
    if [ -x "$p/$*" ]; then
      IFS="$OLDIFS"
      return 0
    fi
  done
  IFS="$OLDIFS"
  return 1
}

set_debconf_value()
{
prog=$1
name=$2
eval variable="\$${name}"
if [ -n "$variable" ]; then
  db_set clamav-$prog/$name "$variable" || true
fi
}

make_dir()
{
  DIR=$1
  if [ -d "$DIR" ]; then
    return 0;
  fi
  [ -n "$User" ] || User=clamav
  mkdir -p -m 0755 "$DIR"
  chown "$User" "$DIR"
  pathfind restorecon && restorecon "$DIR"
}

# Debconf Functions

isdigit ()
{
  case $1 in
    [[:digit:]]*)
    ISDIGIT=1
    ;;
    *)
    ISDIGIT=0
    ;;
  esac
}

inputdigit ()
{
  ISDIGIT=0
  while [ "$ISDIGIT" = '0' ]; do
    db_input "$1" "$2" || true
    if ! db_go; then
      return 30
    fi
    db_get $2 || true
    isdigit $RET
    if [ "$ISDIGIT" = '0' ]; then
      db_input critical clamav-base/numinfo || true
      db_go
    fi
  done
  return 0
}

StateGeneric()
{
  PRIO=$1
  QUESTION=$2
  NEXT=$3
  LAST=$4

db_input $PRIO $QUESTION || true
  if db_go; then
    STATE=$NEXT
  else
    STATE=$LAST
  fi
}

StateGenericDigit()
{
  PRIO=$1
  QUESTION=$2
  NEXT=$3
  LAST=$4

inputdigit $PRIO $QUESTION || true
  if db_go; then
    STATE=$NEXT
  else
    STATE=$LAST
  fi
}

case "$1" in
  configure)

# The DEB*FILE files are used temporarily during the update of the CLAMAV* files.
  DEBCONFFILE=/var/lib/clamav/clamav.conf
  CLAMAVCONF=/etc/clamav/clamd.conf
  DEBROTATEFILE=/var/lib/clamav/clamdrotate.debconf
  CLAMAVROTATEFILE=/etc/logrotate.d/clamav-daemon
  DEBSYSTEMDCLAMDCONF=/var/lib/clamav/extend.conf
  CLAMAVSYSTEMDCLAMDONF=/etc/systemd/system/clamav-daemon.service.d/extend.conf

# Update the configuration file
  db_get clamav-daemon/debconf || true
  if [ "$RET" = "true" ]; then
    # Handle the configuration via debconf

# Read the configuration file
    slurp_config "$CLAMAVCONF"

# Get the debconf configuration
    db_get clamav-daemon/User || true
    User="$RET"
    db_get clamav-daemon/AddGroups || true
    AddGroups="$RET"
    db_get clamav-daemon/TcpOrLocal || true
    if [ "$RET" = "TCP" ]; then
      sock="tcp"
      db_get clamav-daemon/TCPSocket || true
      TCPSocket="$RET"
      db_get clamav-daemon/TCPAddr
      TCPAddr="$RET"
    else
      sock="unix"
      db_get clamav-daemon/LocalSocket || true
      LocalSocket="$RET"
      db_get clamav-daemon/FixStaleSocket || true
      FixStaleSocket="$RET"
      db_get clamav-daemon/LocalSocketGroup || true
      LocalSocketGroup="$RET"
      db_get clamav-daemon/LocalSocketMode || true
      LocalSocketMode="$RET"
    fi
    db_get clamav-daemon/ScanMail || true
    ScanMail="$RET"
    db_get clamav-daemon/ScanArchive || true
    ScanArchive="$RET"
    db_get clamav-daemon/MaxDirectoryRecursion || true
    if [ "$RET" != "0" ]; then
      MaxDirectoryRecursion="$RET"
      db_get clamav-daemon/FollowDirectorySymlinks || true
      FollowDirectorySymlinks="$RET"
    else
      MaxDirectoryRecursion=15
      FollowDirectorySymlinks=false
    fi
    db_get clamav-daemon/FollowFileSymlinks || true
    FollowFileSymlinks="$RET"
    db_get clamav-daemon/ThreadTimeout || true
    ThreadTimeout="$RET"
    db_get clamav-daemon/ReadTimeout || true
    ReadTimeout="$RET"
    [ -z "$ReadTimeout" ] && ReadTimeout="$ThreadTimeout"
    db_get clamav-daemon/MaxThreads || true
    MaxThreads="$RET"
    db_get clamav-daemon/MaxConnectionQueueLength || true
    MaxConnectionQueueLength="$RET"
    db_get clamav-daemon/StreamMaxLength || true
    StreamMaxLength="$RET"
    db_get clamav-daemon/LogSyslog || true
    LogSyslog="$RET"
    db_get clamav-daemon/LogFile || true
    if [ "$RET" != "" ]; then
      LogFile="$RET"
      db_get clamav-daemon/LogTime || true
      LogTime="$RET"
    fi
    db_get clamav-daemon/LogRotate || true
    LogRotate="$RET"
    db_get clamav-daemon/SelfCheck || true
    SelfCheck="$RET"
    db_get clamav-daemon/Bytecode || true
    Bytecode="$RET"
    if [ "$Bytecode" = "true" ]; then
      db_get clamav-daemon/BytecodeSecurity || true
      BytecodeSecurity="$RET"
      db_get clamav-daemon/BytecodeTimeout || true
      BytecodeTimeout="$RET"
    fi
    db_get clamav-daemon/OnAccessMaxFileSize || true
    OnAccessMaxFileSize="$RET"
    db_get clamav-daemon/AllowAllMatchScan || true
    AllowAllMatchScan="$RET"
    db_get clamav-daemon/ForceToDisk || true
    ForceToDisk="$RET"
    db_get clamav-daemon/DisableCertCheck || true
    DisableCertCheck="$RET"
    db_get clamav-daemon/ScanSWF || true
    ScanSWF="$RET"
    db_get clamav-daemon/MaxEmbeddedPE || true
    MaxEmbeddedPE="$RET"
    db_get clamav-daemon/MaxHTMLNormalize || true
    MaxHTMLNormalize="$RET"
    db_get clamav-daemon/MaxHTMLNoTags || true
    MaxHTMLNoTags="$RET"
    db_get clamav-daemon/MaxScriptNormalize || true
    MaxScriptNormalize="$RET"
    db_get clamav-daemon/MaxZipTypeRcg || true
    MaxZipTypeRcg="$RET"
    db_get clamav-daemon/BlockMax || RET=""
    BlockMax="$RET"

# Set default values for options not configured via debconf
    [ -z "$LogFileUnlock" ] && LogFileUnlock=false
    [ -z "$LogFileMaxSize" ] && LogFileMaxSize=0
    [ -z "$LogClean" ] && LogClean=false
    [ -z "$LogFacility" ] && LogFacility=LOG_LOCAL6
    [ -z "$LogVerbose" ] && LogVerbose=false
    [ -z "$ExtendedDetectionInfo" ] && ExtendedDetectionInfo=true
    [ -z "$DatabaseDirectory" ] && DatabaseDirectory='/var/lib/clamav'
    [ -z "$OfficialDatabaseOnly" ] && OfficialDatabaseOnly=false
    [ -z "$CommandReadTimeout" ] && CommandReadTimeout=30
    [ -z "$SendBufTimeout" ] && SendBufTimeout=200
    [ -z "$MaxQueue" ] && MaxQueue=100
    [ -z "$IdleTimeout" ] && IdleTimeout=30
    [ -z "$CrossFilesystems" ] && CrossFilesystems=true
    [ -z "$ExitOnOOM" ] && ExitOnOOM=false
    [ -z "$Foreground" ] && Foreground=false
    [ -z "$Debug" ] && Debug=false
    [ -z "$LeaveTemporaryFiles" ] && LeaveTemporaryFiles=false
    [ -z "$DetectPUA" ] && DetectPUA=false
    [ -z "$AlgorithmicDetection" ] && AlgorithmicDetection=true
    [ -z "$DisableCache" ] && DisableCache=false
    [ -z "$ScanPE" ] && ScanPE=true
    [ -z "$ScanELF" ] && ScanELF=true
    [ -z "$ScanOLE2" ] && ScanOLE2=true
    [ -z "$OLE2BlockMacros" ] && OLE2BlockMacros=false
    [ -z "$OnAccessExcludeRootUID" ] && OnAccessExcludeRootUID=no
    [ -z "$ScanPDF" ] && ScanPDF=true
    [ -z "$ScanPartialMessages" ] && ScanPartialMessages=false
    [ -z "$PhishingSignatures" ] && PhishingSignatures=true
    [ -z "$PhishingScanURLs" ] && PhishingScanURLs=true
    [ -z "$PhishingAlwaysBlockSSLMismatch" ] && PhishingAlwaysBlockSSLMismatch=false
    [ -z "$PhishingAlwaysBlockCloak" ] && PhishingAlwaysBlockCloak=false
    [ -z "$PartitionIntersection" ] && PartitionIntersection=false
    [ -z "$HeuristicScanPrecedence" ] && HeuristicScanPrecedence=false
    [ -z "$StructuredDataDetection" ] && StructuredDataDetection=false
    [ -z "$ScanHTML" ] && ScanHTML=true
    [ -z "$ArchiveBlockEncrypted" ] && ArchiveBlockEncrypted=false
    [ -z "$MaxScanTime" ] && MaxScanTime=120000
    [ -z "$MaxScanSize" ] && MaxScanSize=100M
    [ -z "$MaxFileSize" ] && MaxFileSize=25M
    [ -z "$MaxRecursion" ] && MaxRecursion=16
    [ -z "$MaxFiles" ] && MaxFiles=10000
    [ -z "$MaxPartitions" ] && MaxPartitions=50
    [ -z "$MaxIconsPE" ] && MaxIconsPE=100
    [ -z "$PCREMatchLimit" ] && PCREMatchLimit=10000
    [ -z "$PCRERecMatchLimit" ] && PCRERecMatchLimit=5000
    [ -z "$PCREMaxFileSize" ] && PCREMaxFileSize=25M
    [ -z "$ScanXMLDOCS" ] && ScanXMLDOCS=true
    [ -z "$ScanHWP3" ] && ScanHWP3=true
    [ -z "$MaxRecHWP3" ] && MaxRecHWP3=16
    [ -z "$PreludeEnable" ] && PreludeEnable=no
    [ -z "$PreludeAnalyzerName" ] && PreludeAnalyzerName=ClamAV

# Create the new configuration file
    echo "#Automatically Generated by clamav-daemon postinst" > $DEBCONFFILE
    echo "#To reconfigure clamd run #dpkg-reconfigure clamav-daemon" >> $DEBCONFFILE
    echo "#Please read /usr/share/doc/clamav-daemon/README.Debian.gz for details" >> $DEBCONFFILE
    echo "[Service]" > "$DEBSYSTEMDCLAMDCONF"
    echo "ExecStartPre=-/bin/mkdir -p /run/clamav" >> "$DEBSYSTEMDCLAMDCONF"
    echo "ExecStartPre=/bin/chown $User /run/clamav" >> "$DEBSYSTEMDCLAMDCONF"

if [ "$sock" = "tcp" ]; then
      echo "TCPSocket $TCPSocket" >> $DEBCONFFILE
      if [ "$TCPAddr" != "any" ]; then
        echo "TCPAddr $TCPAddr" >> $DEBCONFFILE
      fi
    else
      echo "LocalSocket $LocalSocket" >> $DEBCONFFILE
      echo "FixStaleSocket $FixStaleSocket" >> $DEBCONFFILE
      echo "LocalSocketGroup $LocalSocketGroup" >> $DEBCONFFILE
      echo "LocalSocketMode $LocalSocketMode" >> $DEBCONFFILE
    fi
    # Finish the configuration file update, by applying changes to the real configuration file.
    mkdir -p `dirname $CLAMAVSYSTEMDCLAMDONF` 2>/dev/null || true
    ucf_cleanup "$CLAMAVSYSTEMDCLAMDONF"
    ucf_upgrade_check "$CLAMAVSYSTEMDCLAMDONF" "$DEBSYSTEMDCLAMDCONF" /var/lib/ucf/cache/:etc:systemd:system:clamav-daemon.service.d:extend.conf
    rm -f "$DEBSYSTEMDCLAMDCONF"
    if [ -e "$CLAMAVSYSTEMDCLAMDONF".dpkg-old ]; then
      echo "Removing old systemd service override options for clamav-daemon"
      rm -f "$CLAMAVSYSTEMDCLAMDONF".dpkg-old
    fi

if [ -n "$TemporaryDirectory" ]; then
	cat >> $DEBCONFFILE << EOF
TemporaryDirectory $TemporaryDirectory
EOF
    else
	cat >> $DEBCONFFILE << EOF
# TemporaryDirectory is not set to its default /tmp here to make overriding
# the default with environment variables TMPDIR/TMP/TEMP possible
EOF
    fi

cat >> $DEBCONFFILE << EOF
User $User
ScanMail $ScanMail
ScanArchive $ScanArchive
ArchiveBlockEncrypted $ArchiveBlockEncrypted
MaxDirectoryRecursion $MaxDirectoryRecursion
FollowDirectorySymlinks $FollowDirectorySymlinks
FollowFileSymlinks $FollowFileSymlinks
ReadTimeout $ReadTimeout
MaxThreads $MaxThreads
MaxConnectionQueueLength $MaxConnectionQueueLength
LogSyslog $LogSyslog
LogRotate $LogRotate
LogFacility $LogFacility
LogClean $LogClean
LogVerbose $LogVerbose
PreludeEnable $PreludeEnable
PreludeAnalyzerName $PreludeAnalyzerName
DatabaseDirectory $DatabaseDirectory
OfficialDatabaseOnly $OfficialDatabaseOnly
SelfCheck $SelfCheck
Foreground $Foreground
Debug $Debug
ScanPE $ScanPE
MaxEmbeddedPE $MaxEmbeddedPE
ScanOLE2 $ScanOLE2
ScanPDF $ScanPDF
ScanHTML $ScanHTML
MaxHTMLNormalize $MaxHTMLNormalize
MaxHTMLNoTags $MaxHTMLNoTags
MaxScriptNormalize $MaxScriptNormalize
MaxZipTypeRcg $MaxZipTypeRcg
ScanSWF $ScanSWF
ExitOnOOM $ExitOnOOM
LeaveTemporaryFiles $LeaveTemporaryFiles
AlgorithmicDetection $AlgorithmicDetection
ScanELF $ScanELF
IdleTimeout $IdleTimeout
CrossFilesystems $CrossFilesystems
PhishingSignatures $PhishingSignatures
PhishingScanURLs $PhishingScanURLs
PhishingAlwaysBlockSSLMismatch $PhishingAlwaysBlockSSLMismatch
PhishingAlwaysBlockCloak $PhishingAlwaysBlockCloak
PartitionIntersection $PartitionIntersection
DetectPUA $DetectPUA
ScanPartialMessages $ScanPartialMessages
HeuristicScanPrecedence $HeuristicScanPrecedence
StructuredDataDetection $StructuredDataDetection
CommandReadTimeout $CommandReadTimeout
SendBufTimeout $SendBufTimeout
MaxQueue $MaxQueue
ExtendedDetectionInfo $ExtendedDetectionInfo
OLE2BlockMacros $OLE2BlockMacros
AllowAllMatchScan $AllowAllMatchScan
ForceToDisk $ForceToDisk
DisableCertCheck $DisableCertCheck
DisableCache $DisableCache
MaxScanTime $MaxScanTime
MaxScanSize $MaxScanSize
MaxFileSize $MaxFileSize
MaxRecursion $MaxRecursion
MaxFiles $MaxFiles
MaxPartitions $MaxPartitions
MaxIconsPE $MaxIconsPE
PCREMatchLimit $PCREMatchLimit
PCRERecMatchLimit $PCRERecMatchLimit
PCREMaxFileSize $PCREMaxFileSize
ScanXMLDOCS $ScanXMLDOCS
ScanHWP3 $ScanHWP3
MaxRecHWP3 $MaxRecHWP3
EOF

if is_true "$StructuredDataDetection"; then
      [ -z "$StructuredMinCreditCardCount" ] || StructuredMinCreditCardCount=3
      [ -z "$StructuredMinSSNCount" ] || StructuredMinSSNCount=3
      [ -z "$StructuredSSNFormatNormal" ] || StructuredSSNFormatNormal=true
      [ -z "$StructuredSSNFormatStripped" ] || StructuredSSNFormatStripped=false
      cat >> $DEBCONFFILE << EOF
StructuredMinCreditCardCount $StructuredMinCreditCardCount
StructuredMinSSNCount $StructuredMinSSNCount
StructuredSSNFormatNormal $StructuredSSNFormatNormal
StructuredSSNFormatStripped $StructuredSSNFormatStripped
EOF
    fi

if [ -n "$StreamMaxLength" ]; then
      if [ "$StreamMaxLength" -gt 0 ] ;then
        StreamMaxLength="${StreamMaxLength}M"
      fi
      echo "StreamMaxLength $StreamMaxLength" >> $DEBCONFFILE
    fi
    if [ -n "$IncludePUA" ]; then
      for i in $IncludePUA; do
        echo "IncludePUA $i" >> $DEBCONFFILE
      done
    fi
    if [ -n "$ExcludePUA" ]; then
      for e in $ExcludePUA; do
        echo "ExcludePUA $i" >> $DEBCONFFILE
      done
    fi
    if [ -n "$LogFile" ]; then
      echo "LogFile $LogFile" >> $DEBCONFFILE
      echo "LogTime $LogTime" >> $DEBCONFFILE
      echo "LogFileUnlock $LogFileUnlock" >> $DEBCONFFILE
      echo "LogFileMaxSize $LogFileMaxSize" >> $DEBCONFFILE
    fi

echo "Bytecode $Bytecode" >> $DEBCONFFILE
    if is_true "$Bytecode"; then
      echo "BytecodeSecurity $BytecodeSecurity" >> $DEBCONFFILE
      echo "BytecodeTimeout $BytecodeTimeout" >> $DEBCONFFILE
    fi
    if [ -n "$BlockMax" ]; then
		echo "BlockMax $BlockMax" >> $DEBCONFFILE
    fi
    # Preserve manually created, usually not needed options.
    [ -n "$PidFile" ] && echo "PidFile $PidFile" >> $DEBCONFFILE
    [ -n "$ExcludePath" ] && echo "ExcludePath $ExcludePath" >> $DEBCONFFILE
    [ -n "$VirusEvent" ] && echo "VirusEvent $VirusEvent" >> $DEBCONFFILE
    [ -n "$StreamMinPort" ] && echo "StreamMinPort $StreamMinPort" >> $DEBCONFFILE
    [ -n "$StreamMaxPort" ] && echo "StreamMaxPort $StreamMaxPort" >> $DEBCONFFILE
    [ -n "$OnAccessMaxFileSize" ] && echo "OnAccessMaxFileSize $OnAccessMaxFileSize" >> $DEBCONFFILE
    [ -n "$OnAccessIncludePath" ] && echo "OnAccessIncludePath $OnAccessIncludePath" >> $DEBCONFFILE
    [ -n "$OnAccessExcludePath" ] && echo "OnAccessExcludePath $OnAccessExcludePath" >> $DEBCONFFILE
    [ -n "$OnAccessExcludeUID" ] && echo "OnAccessExcludeUID $OnAccessExcludeUID" >> $DEBCONFFILE
    [ -n "$OnAccessMountPath" ] && echo "OnAccessMountPath $OnAccessMountPath" >> $DEBCONFFILE
    [ -n "$OnAccessDisableDDD" ] && echo "OnAccessDisableDDD $OnAccessDisableDDD" >> $DEBCONFFILE
    [ -n "$OnAccessPrevention" ] && echo "OnAccessPrevention $OnAccessPrevention" >> $DEBCONFFILE
    [ -n "$OnAccessExtraScanning" ] && echo "OnAccessExtraScanning $OnAccessExtraScanning" >> $DEBCONFFILE
    [ -n "$OnAccessMaxThreads" ] && echo "OnAccessMaxThreads $OnAccessMaxThreads" >> $DEBCONFFILE
    [ -n "$OnAccessDenyOnError" ] && echo "OnAccessDenyOnError $OnAccessDenyOnError" >> $DEBCONFFILE
    [ -n "$OnAccessExcludeUname" ] && echo "OnAccessExcludeUname $OnAccessExcludeUname" >> $DEBCONFFILE
    [ -n "$OnAccessRetryAttempts" ] && echo "OnAccessRetryAttempts $OnAccessRetryAttempts" >> $DEBCONFFILE
    [ -n "$HeuristicAlerts" ] && echo "HeuristicAlerts $HeuristicAlerts" >> $DEBCONFFILE
    [ -n "$AlertBrokenExecutables" ] && echo "AlertBrokenExecutables $AlertBrokenExecutables" >> $DEBCONFFILE
    [ -n "$AlertEncrypted" ] && echo "AlertEncrypted $AlertEncrypted" >> $DEBCONFFILE
    [ -n "$AlertEncryptedArchive" ] && echo "AlertEncryptedArchive $AlertEncryptedArchive" >> $DEBCONFFILE
    [ -n "$AlertEncryptedDoc" ] && echo "AlertEncryptedDoc $AlertEncryptedDoc" >> $DEBCONFFILE
    [ -n "$AlertOLE2Macros" ] && echo "AlertOLE2Macros $AlertOLE2Macros" >> $DEBCONFFILE
    [ -n "$AlertPhishingSSLMismatch" ] && echo "AlertPhishingSSLMismatch $AlertPhishingSSLMismatch" >> $DEBCONFFILE
    [ -n "$AlertPhishingCloak" ] && echo "AlertPhishingCloak $AlertPhishingCloak" >> $DEBCONFFILE
    [ -n "$AlertPartitionIntersection" ] && echo "AlertPartitionIntersection $AlertPartitionIntersection" >> $DEBCONFFILE
    [ -n "$AlertExceedsMax" ] && echo "AlertExceedsMax $AlertExceedsMax" >> $DEBCONFFILE
    [ -n "$ConcurrentDatabaseReload" ] && echo "ConcurrentDatabaseReload $ConcurrentDatabaseReload" >> $DEBCONFFILE
    [ -n "$StructuredCCOnly" ] && echo "StructuredCCOnly $StructuredCCOnly" >> $DEBCONFFILE
    [ -n "$BytecodeUnsigned" ] && echo "BytecodeUnsigned $BytecodeUnsigned" >> $DEBCONFFILE
    [ -n "$AlertBrokenMedia" ] && echo "AlertBrokenMedia $AlertBrokenMedia" >> $DEBCONFFILE

# Finish the configuration file update, by applying changes to the real configuration file.
    ucf_cleanup "$CLAMAVCONF"
    ucf_upgrade_check "$CLAMAVCONF" "$DEBCONFFILE" /var/lib/ucf/cache/:etc:clamav:clamd.conf
    rm -f "$DEBCONFFILE"

# Add additional groups (if any)
    if [ -n "$AddGroups" ]; then
      for group in $AddGroups; do
        id "$User" | grep -q "$group" || adduser "$User" "$group"
      done
    fi

else
    # Let the configuration be handled manually.
    ucf_cleanup "$CLAMAVCONF"
    ucf -p "$CLAMAVCONF"
    if [ -e "$CLAMAVSYSTEMDCLAMDONF" ]; then
      echo "Disabling old systemd service override options for clamav-daemon"
      mv "$CLAMAVSYSTEMDCLAMDONF" "$CLAMAVSYSTEMDCLAMDONF".dpkg-old
      ucf -p "$CLAMAVSYSTEMDCLAMDONF"
    fi
  fi

# Set permission for the configuration file.
  chmod 644 $CLAMAVCONF || true
  chown root:root $CLAMAVCONF || true

# Read the configuration file
  slurp_config "$CLAMAVCONF"

if [ -n "$LogFile" ]; then
    if echo "$LogFile" | grep -q '^/dev/'; then
      make_logrotate=false
    else
      if [ "$LogRotate" = "true" ]; then
        make_logrotate=true
      else
        make_logrotate=false
      fi
    fi
    [ -z "$User" ] && User=clamav
    if [ "$make_logrotate" = 'true' ]; then
      # update the logrotate file
      echo "$LogFile {" > $DEBROTATEFILE
      echo "     rotate 12" >> $DEBROTATEFILE
      echo "     weekly" >> $DEBROTATEFILE
      echo "     compress" >> $DEBROTATEFILE
      echo "     delaycompress" >> $DEBROTATEFILE
      echo "     create 640  $User adm" >> $DEBROTATEFILE
      echo "     postrotate" >> $DEBROTATEFILE
      echo "     if [ -d /run/systemd/system ]; then" >> $DEBROTATEFILE
      echo "         systemctl -q is-active clamav-daemon && systemctl kill --signal=SIGHUP clamav-daemon || true" >> $DEBROTATEFILE
      echo "     else" >> $DEBROTATEFILE
      echo "         invoke-rc.d clamav-daemon reload-log > /dev/null || true" >> $DEBROTATEFILE
      echo "     fi" >> $DEBROTATEFILE
      echo "     endscript" >> $DEBROTATEFILE
      echo "     }" >> $DEBROTATEFILE
      touch "$LogFile"
      if [ -f "$LogFile" ] && [ ! -L "$LogFile" ]; then
        chown "$User":adm "$LogFile"
        chmod 0640 "$LogFile"
      fi
      ucf_cleanup "$CLAMAVROTATEFILE"
      ucf_upgrade_check "$CLAMAVROTATEFILE" "$DEBROTATEFILE" /var/lib/ucf/cache/:etc:logrotate.d:clamav-daemon
      rm -f $DEBROTATEFILE
      if [ -e "$CLAMAVROTATEFILE".dpkg-old ]; then
        echo "Removing old logrotate script for clamav-daemon"
        rm -f "$CLAMAVROTATEFILE".dpkg-old
      fi
    else
      if [ -e "$CLAMAVROTATEFILE" ]; then
        echo "Disabling old logrotate script for clamav-daemon"
        mv "$CLAMAVROTATEFILE" "$CLAMAVROTATEFILE".dpkg-old
        ucf -p "$CLAMAVROTATEFILE"
      fi
    fi
  else
    if [ -e "$CLAMAVROTATEFILE" ]; then
      echo "Disabling old logrotate script for clamav-daemon"
      mv "$CLAMAVROTATEFILE" "$CLAMAVROTATEFILE".dpkg-old
      ucf -p "$CLAMAVROTATEFILE"
    fi
  fi

db_stop || true

;;
  abort-upgrade|abort-remove|abort-deconfigure)
  ;;
  *)
  echo "postinst called with unknown argument \`$1'" >&2
  exit 1
  ;;
esac

# dh_installdeb will replace this with shell code automatically
# generated by other debhelper scripts.

# Automatically added by dh_apparmor/3.0.4-2ubuntu2.3build2
if [ "$1" = "configure" ]; then
    APP_PROFILE="/etc/apparmor.d/usr.sbin.clamd"
    if [ -f "$APP_PROFILE" ]; then
        # Add the local/ include
        LOCAL_APP_PROFILE="/etc/apparmor.d/local/usr.sbin.clamd"

test -e "$LOCAL_APP_PROFILE" || {
            mkdir -p `dirname "$LOCAL_APP_PROFILE"`
            install --mode 644 /dev/null "$LOCAL_APP_PROFILE"
        }

# Reload the profile, including any abstraction updates
        if aa-enabled --quiet 2>/dev/null; then
            apparmor_parser -r -T -W "$APP_PROFILE" || true
        fi
    fi
fi
# End automatically added section
# Automatically added by dh_installinit/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -z "${DPKG_ROOT:-}" ] && [ -x "/etc/init.d/clamav-daemon" ]; then
		update-rc.d clamav-daemon defaults >/dev/null
		if [ -n "$2" ]; then
			_dh_action=restart
		else
			_dh_action=start
		fi
		invoke-rc.d --skip-systemd-native clamav-daemon $_dh_action || exit 1
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	# This will only remove masks created by d-s-h on package removal.
	deb-systemd-helper unmask 'clamav-daemon.service' >/dev/null || true

# was-enabled defaults to true, so new installations run enable.
	if deb-systemd-helper --quiet was-enabled 'clamav-daemon.service'; then
		# Enables the unit on first installation, creates new
		# symlinks on upgrades if the unit file has changed.
		deb-systemd-helper enable 'clamav-daemon.service' >/dev/null || true
	else
		# Update the statefile to add new symlinks (if any), which need to be
		# cleaned up on purge. Also remove old symlinks.
		deb-systemd-helper update-state 'clamav-daemon.service' >/dev/null || true
	fi
fi
# End automatically added section
# Automatically added by dh_installsystemd/13.6ubuntu1
if [ "$1" = "configure" ] || [ "$1" = "abort-upgrade" ] || [ "$1" = "abort-deconfigure" ] || [ "$1" = "abort-remove" ] ; then
	if [ -d /run/systemd/system ]; then
		systemctl --system daemon-reload >/dev/null || true
		if [ -n "$2" ]; then
			_dh_action=restart
		else
			_dh_action=start
		fi
		deb-systemd-invoke $_dh_action 'clamav-daemon.service' >/dev/null || true
	fi
fi
# End automatically added section

exit 0