0x1949 Team - FAZEMRX - MANAGER

Edit File: test_iocp.py

# Copyright (c) Twisted Matrix Laboratories.
# See LICENSE for details.

"""
Tests for L{twisted.internet.iocpreactor}.
"""

import errno
import sys
import time
from array import array
from socket import AF_INET, AF_INET6, SOCK_STREAM, SOL_SOCKET, socket
from struct import pack
from unittest import skipIf

from zope.interface.verify import verifyClass

from twisted.internet.interfaces import IPushProducer
from twisted.python.log import msg
from twisted.trial.unittest import TestCase

try:
    from twisted.internet.iocpreactor import iocpsupport as _iocp, tcp, udp
    from twisted.internet.iocpreactor.abstract import FileHandle
    from twisted.internet.iocpreactor.const import SO_UPDATE_ACCEPT_CONTEXT
    from twisted.internet.iocpreactor.interfaces import IReadWriteHandle
    from twisted.internet.iocpreactor.reactor import (
        EVENTS_PER_LOOP,
        KEY_NORMAL,
        IOCPReactor,
    )
except ImportError:
    if sys.platform == "win32":
        raise

skip = "This test only applies to IOCPReactor"

try:
    socket(AF_INET6, SOCK_STREAM).close()
except OSError as e:
    ipv6Skip = True
    ipv6SkipReason = str(e)

else:
    ipv6Skip = False
    ipv6SkipReason = ""

class SupportTests(TestCase):
    """
    Tests for L{twisted.internet.iocpreactor.iocpsupport}, low-level reactor
    implementation helpers.
    """

def _acceptAddressTest(self, family, localhost):
        """
        Create a C{SOCK_STREAM} connection to localhost using a socket with an
        address family of C{family} and assert that the result of
        L{iocpsupport.get_accept_addrs} is consistent with the result of
        C{socket.getsockname} and C{socket.getpeername}.

A port starts listening (is bound) at the low-level socket without
        calling accept() yet.
        A client is then connected.
        After the client is connected IOCP accept() is called, which is the
        target of these tests.

Most of the time, the socket is ready instantly, but sometimes
        the socket is not ready right away after calling IOCP accept().
        It should not take more than 5 seconds for a socket to be ready, as
        the client connection is already made over the loopback interface.

These are flaky tests.
        Tweak the failure rate by changing the number of retries and the
        wait/sleep between retries.

If you will need to update the retries to wait more than 5 seconds
        for the port to be available, then there might a bug in the code and
        not the test (or a very, very busy VM running the tests).
        """
        msg(f"family = {family!r}")
        port = socket(family, SOCK_STREAM)
        self.addCleanup(port.close)
        port.bind(("", 0))
        port.listen(1)
        client = socket(family, SOCK_STREAM)
        self.addCleanup(client.close)
        client.setblocking(False)
        try:
            client.connect((localhost, port.getsockname()[1]))
        except OSError as e:
            self.assertIn(e.errno, (errno.EINPROGRESS, errno.EWOULDBLOCK))

server = socket(family, SOCK_STREAM)
        self.addCleanup(server.close)
        buff = array("B", b"\0" * 256)
        self.assertEqual(0, _iocp.accept(port.fileno(), server.fileno(), buff, None))

for attemptsRemaining in reversed(range(5)):
            # Calling setsockopt after _iocp.accept might fail for both IPv4
            # and IPV6 with "[Errno 10057] A request to send or receive ..."
            # This is when ERROR_IO_PENDING is returned and means that the
            # socket is not yet ready and accept will be handled via the
            # callback event.
            # For this test, with the purpose of keeping the test simple,
            # we don't implement the event callback.
            # The event callback functionality is tested via the high level
            # tests for general reactor API.
            # We retry multiple times to cover.
            try:
                server.setsockopt(
                    SOL_SOCKET, SO_UPDATE_ACCEPT_CONTEXT, pack("P", port.fileno())
                )
                break
            except OSError as socketError:
                # getattr is used below to make mypy happy.
                if socketError.errno != getattr(errno, "WSAENOTCONN"):
                    # This is not the expected error so re-raise the error without retrying.
                    raise

# The socket is not yet ready to accept connections,
                # setsockopt fails.
                if attemptsRemaining == 0:
                    # We ran out of retries.
                    raise

# Without a sleep here even retrying 20 times will fail.
            # This should allow other threads to execute and hopefully with the next
            # try setsockopt will succeed.
            time.sleep(0.2)

self.assertEqual(
            (family, client.getpeername()[:2], client.getsockname()[:2]),
            _iocp.get_accept_addrs(server.fileno(), buff),
        )

def test_ipv4AcceptAddress(self):
        """
        L{iocpsupport.get_accept_addrs} returns a three-tuple of address
        information about the socket associated with the file descriptor passed
        to it.  For a connection using IPv4:

- the first element is C{AF_INET}
          - the second element is a two-tuple of a dotted decimal notation IPv4
            address and a port number giving the peer address of the connection
          - the third element is the same type giving the host address of the
            connection
        """
        self._acceptAddressTest(AF_INET, "127.0.0.1")

@skipIf(ipv6Skip, ipv6SkipReason)
    def test_ipv6AcceptAddress(self):
        """
        Like L{test_ipv4AcceptAddress}, but for IPv6 connections.
        In this case:

- the first element is C{AF_INET6}
          - the second element is a two-tuple of a hexadecimal IPv6 address
            literal and a port number giving the peer address of the connection
          - the third element is the same type giving the host address of the
            connection
        """
        self._acceptAddressTest(AF_INET6, "::1")

class IOCPReactorTests(TestCase):
    def test_noPendingTimerEvents(self):
        """
        Test reactor behavior (doIteration) when there are no pending time
        events.
        """
        ir = IOCPReactor()
        ir.wakeUp()
        self.assertFalse(ir.doIteration(None))

def test_reactorInterfaces(self):
        """
        Verify that IOCP socket-representing classes implement IReadWriteHandle
        """
        self.assertTrue(verifyClass(IReadWriteHandle, tcp.Connection))
        self.assertTrue(verifyClass(IReadWriteHandle, udp.Port))

def test_fileHandleInterfaces(self):
        """
        Verify that L{Filehandle} implements L{IPushProducer}.
        """
        self.assertTrue(verifyClass(IPushProducer, FileHandle))

def test_maxEventsPerIteration(self):
        """
        Verify that we don't lose an event when more than EVENTS_PER_LOOP
        events occur in the same reactor iteration
        """

class FakeFD:
            counter = 0

def logPrefix(self):
                return "FakeFD"

def cb(self, rc, bytes, evt):
                self.counter += 1

ir = IOCPReactor()
        fd = FakeFD()
        event = _iocp.Event(fd.cb, fd)
        for _ in range(EVENTS_PER_LOOP + 1):
            ir.port.postEvent(0, KEY_NORMAL, event)
        ir.doIteration(None)
        self.assertEqual(fd.counter, EVENTS_PER_LOOP)
        ir.doIteration(0)
        self.assertEqual(fd.counter, EVENTS_PER_LOOP + 1)