0x1949 Team - FAZEMRX - MANAGER

Edit File: sha256-armv4.pl

#!/usr/bin/env perl
# SPDX-License-Identifier: GPL-2.0

# This code is taken from the OpenSSL project but the author (Andy Polyakov)
# has relicensed it under the GPLv2. Therefore this program is free software;
# you can redistribute it and/or modify it under the terms of the GNU General
# Public License version 2 as published by the Free Software Foundation.
#
# The original headers, including the original license headers, are
# included below for completeness.

# ====================================================================
# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
# project. The module is, however, dual licensed under OpenSSL and
# CRYPTOGAMS licenses depending on where you obtain it. For further
# details see https://www.openssl.org/~appro/cryptogams/.
# ====================================================================

# SHA256 block procedure for ARMv4. May 2007.

# Performance is ~2x better than gcc 3.4 generated code and in "abso-
# lute" terms is ~2250 cycles per 64-byte block or ~35 cycles per
# byte [on single-issue Xscale PXA250 core].

# July 2010.
#
# Rescheduling for dual-issue pipeline resulted in 22% improvement on
# Cortex A8 core and ~20 cycles per processed byte.

# February 2011.
#
# Profiler-assisted and platform-specific optimization resulted in 16%
# improvement on Cortex A8 core and ~15.4 cycles per processed byte.

# September 2013.
#
# Add NEON implementation. On Cortex A8 it was measured to process one
# byte in 12.5 cycles or 23% faster than integer-only code. Snapdragon
# S4 does it in 12.5 cycles too, but it's 50% faster than integer-only
# code (meaning that latter performs sub-optimally, nothing was done
# about it).

# May 2014.
#
# Add ARMv8 code path performing at 2.0 cpb on Apple A7.

while (($output=shift) && ($output!~/^\w[\w\-]*\.\w+$/)) {}
open STDOUT,">$output";

$ctx="r0";	$t0="r0";
$inp="r1";	$t4="r1";
$len="r2";	$t1="r2";
$T1="r3";	$t3="r3";
$A="r4";
$B="r5";
$C="r6";
$D="r7";
$E="r8";
$F="r9";
$G="r10";
$H="r11";
@V=($A,$B,$C,$D,$E,$F,$G,$H);
$t2="r12";
$Ktbl="r14";

@Sigma0=( 2,13,22);
@Sigma1=( 6,11,25);
@sigma0=( 7,18, 3);
@sigma1=(17,19,10);

sub BODY_00_15 {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;

$code.=<<___ if ($i<16);
#if __ARM_ARCH__>=7
	@ ldr	$t1,[$inp],#4			@ $i
# if $i==15
	str	$inp,[sp,#17*4]			@ make room for $t4
# endif
	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
# ifndef __ARMEB__
	rev	$t1,$t1
# endif
#else
	@ ldrb	$t1,[$inp,#3]			@ $i
	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
	ldrb	$t2,[$inp,#2]
	ldrb	$t0,[$inp,#1]
	orr	$t1,$t1,$t2,lsl#8
	ldrb	$t2,[$inp],#4
	orr	$t1,$t1,$t0,lsl#16
# if $i==15
	str	$inp,[sp,#17*4]			@ make room for $t4
# endif
	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`
	orr	$t1,$t1,$t2,lsl#24
	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
#endif
___
$code.=<<___;
	ldr	$t2,[$Ktbl],#4			@ *K256++
	add	$h,$h,$t1			@ h+=X[i]
	str	$t1,[sp,#`$i%16`*4]
	eor	$t1,$f,$g
	add	$h,$h,$t0,ror#$Sigma1[0]	@ h+=Sigma1(e)
	and	$t1,$t1,$e
	add	$h,$h,$t2			@ h+=K256[i]
	eor	$t1,$t1,$g			@ Ch(e,f,g)
	eor	$t0,$a,$a,ror#`$Sigma0[1]-$Sigma0[0]`
	add	$h,$h,$t1			@ h+=Ch(e,f,g)
#if $i==31
	and	$t2,$t2,#0xff
	cmp	$t2,#0xf2			@ done?
#endif
#if $i<15
# if __ARM_ARCH__>=7
	ldr	$t1,[$inp],#4			@ prefetch
# else
	ldrb	$t1,[$inp,#3]
# endif
	eor	$t2,$a,$b			@ a^b, b^c in next round
#else
	ldr	$t1,[sp,#`($i+2)%16`*4]		@ from future BODY_16_xx
	eor	$t2,$a,$b			@ a^b, b^c in next round
	ldr	$t4,[sp,#`($i+15)%16`*4]	@ from future BODY_16_xx
#endif
	eor	$t0,$t0,$a,ror#`$Sigma0[2]-$Sigma0[0]`	@ Sigma0(a)
	and	$t3,$t3,$t2			@ (b^c)&=(a^b)
	add	$d,$d,$h			@ d+=h
	eor	$t3,$t3,$b			@ Maj(a,b,c)
	add	$h,$h,$t0,ror#$Sigma0[0]	@ h+=Sigma0(a)
	@ add	$h,$h,$t3			@ h+=Maj(a,b,c)
___
	($t2,$t3)=($t3,$t2);
}

sub BODY_16_XX {
my ($i,$a,$b,$c,$d,$e,$f,$g,$h) = @_;

$code.=<<___;
	@ ldr	$t1,[sp,#`($i+1)%16`*4]		@ $i
	@ ldr	$t4,[sp,#`($i+14)%16`*4]
	mov	$t0,$t1,ror#$sigma0[0]
	add	$a,$a,$t2			@ h+=Maj(a,b,c) from the past
	mov	$t2,$t4,ror#$sigma1[0]
	eor	$t0,$t0,$t1,ror#$sigma0[1]
	eor	$t2,$t2,$t4,ror#$sigma1[1]
	eor	$t0,$t0,$t1,lsr#$sigma0[2]	@ sigma0(X[i+1])
	ldr	$t1,[sp,#`($i+0)%16`*4]
	eor	$t2,$t2,$t4,lsr#$sigma1[2]	@ sigma1(X[i+14])
	ldr	$t4,[sp,#`($i+9)%16`*4]

add	$t2,$t2,$t0
	eor	$t0,$e,$e,ror#`$Sigma1[1]-$Sigma1[0]`	@ from BODY_00_15
	add	$t1,$t1,$t2
	eor	$t0,$t0,$e,ror#`$Sigma1[2]-$Sigma1[0]`	@ Sigma1(e)
	add	$t1,$t1,$t4			@ X[i]
___
	&BODY_00_15(@_);
}

$code=<<___;
#ifndef __KERNEL__
# include "arm_arch.h"
#else
# define __ARM_ARCH__ __LINUX_ARM_ARCH__
# define __ARM_MAX_ARCH__ 7
#endif

.text
#if __ARM_ARCH__<7
.code	32
#else
.syntax unified
# ifdef __thumb2__
.thumb
# else
.code   32
# endif
#endif

.type	K256,%object
.align	5
K256:
.word	0x428a2f98,0x71374491,0xb5c0fbcf,0xe9b5dba5
.word	0x3956c25b,0x59f111f1,0x923f82a4,0xab1c5ed5
.word	0xd807aa98,0x12835b01,0x243185be,0x550c7dc3
.word	0x72be5d74,0x80deb1fe,0x9bdc06a7,0xc19bf174
.word	0xe49b69c1,0xefbe4786,0x0fc19dc6,0x240ca1cc
.word	0x2de92c6f,0x4a7484aa,0x5cb0a9dc,0x76f988da
.word	0x983e5152,0xa831c66d,0xb00327c8,0xbf597fc7
.word	0xc6e00bf3,0xd5a79147,0x06ca6351,0x14292967
.word	0x27b70a85,0x2e1b2138,0x4d2c6dfc,0x53380d13
.word	0x650a7354,0x766a0abb,0x81c2c92e,0x92722c85
.word	0xa2bfe8a1,0xa81a664b,0xc24b8b70,0xc76c51a3
.word	0xd192e819,0xd6990624,0xf40e3585,0x106aa070
.word	0x19a4c116,0x1e376c08,0x2748774c,0x34b0bcb5
.word	0x391c0cb3,0x4ed8aa4a,0x5b9cca4f,0x682e6ff3
.word	0x748f82ee,0x78a5636f,0x84c87814,0x8cc70208
.word	0x90befffa,0xa4506ceb,0xbef9a3f7,0xc67178f2
.size	K256,.-K256
.word	0				@ terminator
#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
.LOPENSSL_armcap:
.word	OPENSSL_armcap_P-sha256_block_data_order
#endif
.align	5

.global	sha256_block_data_order
.type	sha256_block_data_order,%function
sha256_block_data_order:
.Lsha256_block_data_order:
#if __ARM_ARCH__<7
	sub	r3,pc,#8		@ sha256_block_data_order
#else
	adr	r3,.Lsha256_block_data_order
#endif
#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
	ldr	r12,.LOPENSSL_armcap
	ldr	r12,[r3,r12]		@ OPENSSL_armcap_P
	tst	r12,#ARMV8_SHA256
	bne	.LARMv8
	tst	r12,#ARMV7_NEON
	bne	.LNEON
#endif
	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp
	stmdb	sp!,{$ctx,$inp,$len,r4-r11,lr}
	ldmia	$ctx,{$A,$B,$C,$D,$E,$F,$G,$H}
	sub	$Ktbl,r3,#256+32	@ K256
	sub	sp,sp,#16*4		@ alloca(X[16])
.Loop:
# if __ARM_ARCH__>=7
	ldr	$t1,[$inp],#4
# else
	ldrb	$t1,[$inp,#3]
# endif
	eor	$t3,$B,$C		@ magic
	eor	$t2,$t2,$t2
___
for($i=0;$i<16;$i++)	{ &BODY_00_15($i,@V); unshift(@V,pop(@V)); }
$code.=".Lrounds_16_xx:\n";
for (;$i<32;$i++)	{ &BODY_16_XX($i,@V); unshift(@V,pop(@V)); }
$code.=<<___;
#if __ARM_ARCH__>=7
	ite	eq			@ Thumb2 thing, sanity check in ARM
#endif
	ldreq	$t3,[sp,#16*4]		@ pull ctx
	bne	.Lrounds_16_xx

add	$A,$A,$t2		@ h+=Maj(a,b,c) from the past
	ldr	$t0,[$t3,#0]
	ldr	$t1,[$t3,#4]
	ldr	$t2,[$t3,#8]
	add	$A,$A,$t0
	ldr	$t0,[$t3,#12]
	add	$B,$B,$t1
	ldr	$t1,[$t3,#16]
	add	$C,$C,$t2
	ldr	$t2,[$t3,#20]
	add	$D,$D,$t0
	ldr	$t0,[$t3,#24]
	add	$E,$E,$t1
	ldr	$t1,[$t3,#28]
	add	$F,$F,$t2
	ldr	$inp,[sp,#17*4]		@ pull inp
	ldr	$t2,[sp,#18*4]		@ pull inp+len
	add	$G,$G,$t0
	add	$H,$H,$t1
	stmia	$t3,{$A,$B,$C,$D,$E,$F,$G,$H}
	cmp	$inp,$t2
	sub	$Ktbl,$Ktbl,#256	@ rewind Ktbl
	bne	.Loop

add	sp,sp,#`16+3`*4	@ destroy frame
#if __ARM_ARCH__>=5
	ldmia	sp!,{r4-r11,pc}
#else
	ldmia	sp!,{r4-r11,lr}
	tst	lr,#1
	moveq	pc,lr			@ be binary compatible with V4, yet
	bx	lr			@ interoperable with Thumb ISA:-)
#endif
.size	sha256_block_data_order,.-sha256_block_data_order
___
######################################################################
# NEON stuff
#
{{{
my @X=map("q$_",(0..3));
my ($T0,$T1,$T2,$T3,$T4,$T5)=("q8","q9","q10","q11","d24","d25");
my $Xfer=$t4;
my $j=0;

sub Dlo()   { shift=~m|q([1]?[0-9])|?"d".($1*2):"";     }
sub Dhi()   { shift=~m|q([1]?[0-9])|?"d".($1*2+1):"";   }

sub AUTOLOAD()          # thunk [simplified] x86-style perlasm
{ my $opcode = $AUTOLOAD; $opcode =~ s/.*:://; $opcode =~ s/_/\./;
  my $arg = pop;
    $arg = "#$arg" if ($arg*1 eq $arg);
    $code .= "\t$opcode\t".join(',',@_,$arg)."\n";
}

sub Xupdate()
{ use integer;
  my $body = shift;
  my @insns = (&$body,&$body,&$body,&$body);
  my ($a,$b,$c,$d,$e,$f,$g,$h);

&vext_8		($T0,@X[0],@X[1],4);	# X[1..4]
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vext_8		($T1,@X[2],@X[3],4);	# X[9..12]
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vshr_u32	($T2,$T0,$sigma0[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += X[9..12]
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vshr_u32	($T1,$T0,$sigma0[2]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vsli_32	($T2,$T0,32-$sigma0[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vshr_u32	($T3,$T0,$sigma0[1]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&veor		($T1,$T1,$T2);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vsli_32	($T3,$T0,32-$sigma0[1]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&veor		($T1,$T1,$T3);		# sigma0(X[1..4])
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vshr_u32	($T5,&Dhi(@X[3]),$sigma1[2]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vadd_i32	(@X[0],@X[0],$T1);	# X[0..3] += sigma0(X[1..4])
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &veor		($T5,$T5,$T4);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vshr_u32	($T4,&Dhi(@X[3]),$sigma1[1]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vsli_32	($T4,&Dhi(@X[3]),32-$sigma1[1]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &veor		($T5,$T5,$T4);		# sigma1(X[14..15])
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vadd_i32	(&Dlo(@X[0]),&Dlo(@X[0]),$T5);# X[0..1] += sigma1(X[14..15])
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vshr_u32	($T5,&Dlo(@X[0]),$sigma1[2]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &veor		($T5,$T5,$T4);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vshr_u32	($T4,&Dlo(@X[0]),$sigma1[1]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vld1_32	("{$T0}","[$Ktbl,:128]!");
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &vsli_32	($T4,&Dlo(@X[0]),32-$sigma1[1]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	  &veor		($T5,$T5,$T4);		# sigma1(X[16..17])
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vadd_i32	(&Dhi(@X[0]),&Dhi(@X[0]),$T5);# X[2..3] += sigma1(X[16..17])
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vadd_i32	($T0,$T0,@X[0]);
	 while($#insns>=2) { eval(shift(@insns)); }
	&vst1_32	("{$T0}","[$Xfer,:128]!");
	 eval(shift(@insns));
	 eval(shift(@insns));

push(@X,shift(@X));		# "rotate" X[]
}

sub Xpreload()
{ use integer;
  my $body = shift;
  my @insns = (&$body,&$body,&$body,&$body);
  my ($a,$b,$c,$d,$e,$f,$g,$h);

eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vld1_32	("{$T0}","[$Ktbl,:128]!");
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vrev32_8	(@X[0],@X[0]);
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	 eval(shift(@insns));
	&vadd_i32	($T0,$T0,@X[0]);
	 foreach (@insns) { eval; }	# remaining instructions
	&vst1_32	("{$T0}","[$Xfer,:128]!");

push(@X,shift(@X));		# "rotate" X[]
}

sub body_00_15 () {
	(
	'($a,$b,$c,$d,$e,$f,$g,$h)=@V;'.
	'&add	($h,$h,$t1)',			# h+=X[i]+K[i]
	'&eor	($t1,$f,$g)',
	'&eor	($t0,$e,$e,"ror#".($Sigma1[1]-$Sigma1[0]))',
	'&add	($a,$a,$t2)',			# h+=Maj(a,b,c) from the past
	'&and	($t1,$t1,$e)',
	'&eor	($t2,$t0,$e,"ror#".($Sigma1[2]-$Sigma1[0]))',	# Sigma1(e)
	'&eor	($t0,$a,$a,"ror#".($Sigma0[1]-$Sigma0[0]))',
	'&eor	($t1,$t1,$g)',			# Ch(e,f,g)
	'&add	($h,$h,$t2,"ror#$Sigma1[0]")',	# h+=Sigma1(e)
	'&eor	($t2,$a,$b)',			# a^b, b^c in next round
	'&eor	($t0,$t0,$a,"ror#".($Sigma0[2]-$Sigma0[0]))',	# Sigma0(a)
	'&add	($h,$h,$t1)',			# h+=Ch(e,f,g)
	'&ldr	($t1,sprintf "[sp,#%d]",4*(($j+1)&15))	if (($j&15)!=15);'.
	'&ldr	($t1,"[$Ktbl]")				if ($j==15);'.
	'&ldr	($t1,"[sp,#64]")			if ($j==31)',
	'&and	($t3,$t3,$t2)',			# (b^c)&=(a^b)
	'&add	($d,$d,$h)',			# d+=h
	'&add	($h,$h,$t0,"ror#$Sigma0[0]");'.	# h+=Sigma0(a)
	'&eor	($t3,$t3,$b)',			# Maj(a,b,c)
	'$j++;	unshift(@V,pop(@V)); ($t2,$t3)=($t3,$t2);'
	)
}

$code.=<<___;
#if __ARM_MAX_ARCH__>=7
.arch	armv7-a
.fpu	neon

.global	sha256_block_data_order_neon
.type	sha256_block_data_order_neon,%function
.align	4
sha256_block_data_order_neon:
.LNEON:
	stmdb	sp!,{r4-r12,lr}

sub	$H,sp,#16*4+16
	adr	$Ktbl,.Lsha256_block_data_order
	sub	$Ktbl,$Ktbl,#.Lsha256_block_data_order-K256
	bic	$H,$H,#15		@ align for 128-bit stores
	mov	$t2,sp
	mov	sp,$H			@ alloca
	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp

vld1.8		{@X[0]},[$inp]!
	vld1.8		{@X[1]},[$inp]!
	vld1.8		{@X[2]},[$inp]!
	vld1.8		{@X[3]},[$inp]!
	vld1.32		{$T0},[$Ktbl,:128]!
	vld1.32		{$T1},[$Ktbl,:128]!
	vld1.32		{$T2},[$Ktbl,:128]!
	vld1.32		{$T3},[$Ktbl,:128]!
	vrev32.8	@X[0],@X[0]		@ yes, even on
	str		$ctx,[sp,#64]
	vrev32.8	@X[1],@X[1]		@ big-endian
	str		$inp,[sp,#68]
	mov		$Xfer,sp
	vrev32.8	@X[2],@X[2]
	str		$len,[sp,#72]
	vrev32.8	@X[3],@X[3]
	str		$t2,[sp,#76]		@ save original sp
	vadd.i32	$T0,$T0,@X[0]
	vadd.i32	$T1,$T1,@X[1]
	vst1.32		{$T0},[$Xfer,:128]!
	vadd.i32	$T2,$T2,@X[2]
	vst1.32		{$T1},[$Xfer,:128]!
	vadd.i32	$T3,$T3,@X[3]
	vst1.32		{$T2},[$Xfer,:128]!
	vst1.32		{$T3},[$Xfer,:128]!

ldmia		$ctx,{$A-$H}
	sub		$Xfer,$Xfer,#64
	ldr		$t1,[sp,#0]
	eor		$t2,$t2,$t2
	eor		$t3,$B,$C
	b		.L_00_48

.align	4
.L_00_48:
___
	&Xupdate(\&body_00_15);
	&Xupdate(\&body_00_15);
	&Xupdate(\&body_00_15);
	&Xupdate(\&body_00_15);
$code.=<<___;
	teq	$t1,#0				@ check for K256 terminator
	ldr	$t1,[sp,#0]
	sub	$Xfer,$Xfer,#64
	bne	.L_00_48

ldr		$inp,[sp,#68]
	ldr		$t0,[sp,#72]
	sub		$Ktbl,$Ktbl,#256	@ rewind $Ktbl
	teq		$inp,$t0
	it		eq
	subeq		$inp,$inp,#64		@ avoid SEGV
	vld1.8		{@X[0]},[$inp]!		@ load next input block
	vld1.8		{@X[1]},[$inp]!
	vld1.8		{@X[2]},[$inp]!
	vld1.8		{@X[3]},[$inp]!
	it		ne
	strne		$inp,[sp,#68]
	mov		$Xfer,sp
___
	&Xpreload(\&body_00_15);
	&Xpreload(\&body_00_15);
	&Xpreload(\&body_00_15);
	&Xpreload(\&body_00_15);
$code.=<<___;
	ldr	$t0,[$t1,#0]
	add	$A,$A,$t2			@ h+=Maj(a,b,c) from the past
	ldr	$t2,[$t1,#4]
	ldr	$t3,[$t1,#8]
	ldr	$t4,[$t1,#12]
	add	$A,$A,$t0			@ accumulate
	ldr	$t0,[$t1,#16]
	add	$B,$B,$t2
	ldr	$t2,[$t1,#20]
	add	$C,$C,$t3
	ldr	$t3,[$t1,#24]
	add	$D,$D,$t4
	ldr	$t4,[$t1,#28]
	add	$E,$E,$t0
	str	$A,[$t1],#4
	add	$F,$F,$t2
	str	$B,[$t1],#4
	add	$G,$G,$t3
	str	$C,[$t1],#4
	add	$H,$H,$t4
	str	$D,[$t1],#4
	stmia	$t1,{$E-$H}

ittte	ne
	movne	$Xfer,sp
	ldrne	$t1,[sp,#0]
	eorne	$t2,$t2,$t2
	ldreq	sp,[sp,#76]			@ restore original sp
	itt	ne
	eorne	$t3,$B,$C
	bne	.L_00_48

ldmia	sp!,{r4-r12,pc}
.size	sha256_block_data_order_neon,.-sha256_block_data_order_neon
#endif
___
}}}
######################################################################
# ARMv8 stuff
#
{{{
my ($ABCD,$EFGH,$abcd)=map("q$_",(0..2));
my @MSG=map("q$_",(8..11));
my ($W0,$W1,$ABCD_SAVE,$EFGH_SAVE)=map("q$_",(12..15));
my $Ktbl="r3";

$code.=<<___;
#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)

# ifdef __thumb2__
#  define INST(a,b,c,d)	.byte	c,d|0xc,a,b
# else
#  define INST(a,b,c,d)	.byte	a,b,c,d
# endif

.type	sha256_block_data_order_armv8,%function
.align	5
sha256_block_data_order_armv8:
.LARMv8:
	vld1.32	{$ABCD,$EFGH},[$ctx]
# ifdef __thumb2__
	adr	$Ktbl,.LARMv8
	sub	$Ktbl,$Ktbl,#.LARMv8-K256
# else
	adrl	$Ktbl,K256
# endif
	add	$len,$inp,$len,lsl#6	@ len to point at the end of inp

.Loop_v8:
	vld1.8		{@MSG[0]-@MSG[1]},[$inp]!
	vld1.8		{@MSG[2]-@MSG[3]},[$inp]!
	vld1.32		{$W0},[$Ktbl]!
	vrev32.8	@MSG[0],@MSG[0]
	vrev32.8	@MSG[1],@MSG[1]
	vrev32.8	@MSG[2],@MSG[2]
	vrev32.8	@MSG[3],@MSG[3]
	vmov		$ABCD_SAVE,$ABCD	@ offload
	vmov		$EFGH_SAVE,$EFGH
	teq		$inp,$len
___
for($i=0;$i<12;$i++) {
$code.=<<___;
	vld1.32		{$W1},[$Ktbl]!
	vadd.i32	$W0,$W0,@MSG[0]
	sha256su0	@MSG[0],@MSG[1]
	vmov		$abcd,$ABCD
	sha256h		$ABCD,$EFGH,$W0
	sha256h2	$EFGH,$abcd,$W0
	sha256su1	@MSG[0],@MSG[2],@MSG[3]
___
	($W0,$W1)=($W1,$W0);	push(@MSG,shift(@MSG));
}
$code.=<<___;
	vld1.32		{$W1},[$Ktbl]!
	vadd.i32	$W0,$W0,@MSG[0]
	vmov		$abcd,$ABCD
	sha256h		$ABCD,$EFGH,$W0
	sha256h2	$EFGH,$abcd,$W0

vld1.32		{$W0},[$Ktbl]!
	vadd.i32	$W1,$W1,@MSG[1]
	vmov		$abcd,$ABCD
	sha256h		$ABCD,$EFGH,$W1
	sha256h2	$EFGH,$abcd,$W1

vld1.32		{$W1},[$Ktbl]
	vadd.i32	$W0,$W0,@MSG[2]
	sub		$Ktbl,$Ktbl,#256-16	@ rewind
	vmov		$abcd,$ABCD
	sha256h		$ABCD,$EFGH,$W0
	sha256h2	$EFGH,$abcd,$W0

vadd.i32	$W1,$W1,@MSG[3]
	vmov		$abcd,$ABCD
	sha256h		$ABCD,$EFGH,$W1
	sha256h2	$EFGH,$abcd,$W1

vadd.i32	$ABCD,$ABCD,$ABCD_SAVE
	vadd.i32	$EFGH,$EFGH,$EFGH_SAVE
	it		ne
	bne		.Loop_v8

vst1.32		{$ABCD,$EFGH},[$ctx]

ret		@ bx lr
.size	sha256_block_data_order_armv8,.-sha256_block_data_order_armv8
#endif
___
}}}
$code.=<<___;
.asciz  "SHA256 block transform for ARMv4/NEON/ARMv8, CRYPTOGAMS by <appro\@openssl.org>"
.align	2
#if __ARM_MAX_ARCH__>=7 && !defined(__KERNEL__)
.comm   OPENSSL_armcap_P,4,4
#endif
___

open SELF,$0;
while(<SELF>) {
	next if (/^#!/);
	last if (!s/^#/@/ and !/^$/);
	print;
}
close SELF;

{   my  %opcode = (
	"sha256h"	=> 0xf3000c40,	"sha256h2"	=> 0xf3100c40,
	"sha256su0"	=> 0xf3ba03c0,	"sha256su1"	=> 0xf3200c40	);

sub unsha256 {
	my ($mnemonic,$arg)=@_;

if ($arg =~ m/q([0-9]+)(?:,\s*q([0-9]+))?,\s*q([0-9]+)/o) {
	    my $word = $opcode{$mnemonic}|(($1&7)<<13)|(($1&8)<<19)
					 |(($2&7)<<17)|(($2&8)<<4)
					 |(($3&7)<<1) |(($3&8)<<2);
	    # since ARMv7 instructions are always encoded little-endian.
	    # correct solution is to use .inst directive, but older
	    # assemblers don't implement it:-(
	    sprintf "INST(0x%02x,0x%02x,0x%02x,0x%02x)\t@ %s %s",
			$word&0xff,($word>>8)&0xff,
			($word>>16)&0xff,($word>>24)&0xff,
			$mnemonic,$arg;
	}
    }
}

foreach (split($/,$code)) {

s/\`([^\`]*)\`/eval $1/geo;

s/\b(sha256\w+)\s+(q.*)/unsha256($1,$2)/geo;

s/\bret\b/bx	lr/go		or
	s/\bbx\s+lr\b/.word\t0xe12fff1e/go;	# make it possible to compile with -march=armv4

print $_,"\n";
}

close STDOUT; # enforce flush