0x1949 Team - FAZEMRX - MANAGER

Edit File: mhl.h

/* SPDX-License-Identifier: GPL-2.0-only */ /* * Defines for Mobile High-Definition Link (MHL) interface * * Copyright (C) 2015, Samsung Electronics, Co., Ltd. * Andrzej Hajda <a.hajda@samsung.com> * * Based on MHL driver for Android devices. * Copyright (C) 2013-2014 Silicon Image, Inc. */ #ifndef __MHL_H__ #define __MHL_H__ #include <linux/types.h> /* Device Capabilities Registers */ enum { MHL_DCAP_DEV_STATE, MHL_DCAP_MHL_VERSION, MHL_DCAP_CAT, MHL_DCAP_ADOPTER_ID_H, MHL_DCAP_ADOPTER_ID_L, MHL_DCAP_VID_LINK_MODE, MHL_DCAP_AUD_LINK_MODE, MHL_DCAP_VIDEO_TYPE, MHL_DCAP_LOG_DEV_MAP, MHL_DCAP_BANDWIDTH, MHL_DCAP_FEATURE_FLAG, MHL_DCAP_DEVICE_ID_H, MHL_DCAP_DEVICE_ID_L, MHL_DCAP_SCRATCHPAD_SIZE, MHL_DCAP_INT_STAT_SIZE, MHL_DCAP_RESERVED, MHL_DCAP_SIZE }; #define MHL_DCAP_CAT_SINK 0x01 #define MHL_DCAP_CAT_SOURCE 0x02 #define MHL_DCAP_CAT_POWER 0x10 #define MHL_DCAP_CAT_PLIM(x) ((x) << 5) #define MHL_DCAP_VID_LINK_RGB444 0x01 #define MHL_DCAP_VID_LINK_YCBCR444 0x02 #define MHL_DCAP_VID_LINK_YCBCR422 0x04 #define MHL_DCAP_VID_LINK_PPIXEL 0x08 #define MHL_DCAP_VID_LINK_ISLANDS 0x10 #define MHL_DCAP_VID_LINK_VGA 0x20 #define MHL_DCAP_VID_LINK_16BPP 0x40 #define MHL_DCAP_AUD_LINK_2CH 0x01 #define MHL_DCAP_AUD_LINK_8CH 0x02 #define MHL_DCAP_VT_GRAPHICS 0x00 #define MHL_DCAP_VT_PHOTO 0x02 #define MHL_DCAP_VT_CINEMA 0x04 #define MHL_DCAP_VT_GAMES 0x08 #define MHL_DCAP_SUPP_VT 0x80 #define MHL_DCAP_LD_DISPLAY 0x01 #define MHL_DCAP_LD_VIDEO 0x02 #define MHL_DCAP_LD_AUDIO 0x04 #define MHL_DCAP_LD_MEDIA 0x08 #define MHL_DCAP_LD_TUNER 0x10 #define MHL_DCAP_LD_RECORD 0x20 #define MHL_DCAP_LD_SPEAKER 0x40 #define MHL_DCAP_LD_GUI 0x80 #define MHL_DCAP_LD_ALL 0xFF #define MHL_DCAP_FEATURE_RCP_SUPPORT 0x01 #define MHL_DCAP_FEATURE_RAP_SUPPORT 0x02 #define MHL_DCAP_FEATURE_SP_SUPPORT 0x04 #define MHL_DCAP_FEATURE_UCP_SEND_SUPPOR 0x08 #define MHL_DCAP_FEATURE_UCP_RECV_SUPPORT 0x10 #define MHL_DCAP_FEATURE_RBP_SUPPORT 0x40 /* Extended Device Capabilities Registers */ enum { MHL_XDC_ECBUS_SPEEDS, MHL_XDC_TMDS_SPEEDS, MHL_XDC_ECBUS_ROLES, MHL_XDC_LOG_DEV_MAPX, MHL_XDC_SIZE }; #define MHL_XDC_ECBUS_S_075 0x01 #define MHL_XDC_ECBUS_S_8BIT 0x02 #define MHL_XDC_ECBUS_S_12BIT 0x04 #define MHL_XDC_ECBUS_D_150 0x10 #define MHL_XDC_ECBUS_D_8BIT 0x20 #define MHL_XDC_TMDS_000 0x00 #define MHL_XDC_TMDS_150 0x01 #define MHL_XDC_TMDS_300 0x02 #define MHL_XDC_TMDS_600 0x04 /* MHL_XDC_ECBUS_ROLES flags */ #define MHL_XDC_DEV_HOST 0x01 #define MHL_XDC_DEV_DEVICE 0x02 #define MHL_XDC_DEV_CHARGER 0x04 #define MHL_XDC_HID_HOST 0x08 #define MHL_XDC_HID_DEVICE 0x10 /* MHL_XDC_LOG_DEV_MAPX flags */ #define MHL_XDC_LD_PHONE 0x01 /* Device Status Registers */ enum { MHL_DST_CONNECTED_RDY, MHL_DST_LINK_MODE, MHL_DST_VERSION, MHL_DST_SIZE }; /* Offset of DEVSTAT registers */ #define MHL_DST_OFFSET 0x30 #define MHL_DST_REG(name) (MHL_DST_OFFSET + MHL_DST_##name) #define MHL_DST_CONN_DCAP_RDY 0x01 #define MHL_DST_CONN_XDEVCAPP_SUPP 0x02 #define MHL_DST_CONN_POW_STAT 0x04 #define MHL_DST_CONN_PLIM_STAT_MASK 0x38 #define MHL_DST_LM_CLK_MODE_MASK 0x07 #define MHL_DST_LM_CLK_MODE_PACKED_PIXEL 0x02 #define MHL_DST_LM_CLK_MODE_NORMAL 0x03 #define MHL_DST_LM_PATH_EN_MASK 0x08 #define MHL_DST_LM_PATH_ENABLED 0x08 #define MHL_DST_LM_PATH_DISABLED 0x00 #define MHL_DST_LM_MUTED_MASK 0x10 /* Extended Device Status Registers */ enum { MHL_XDS_CURR_ECBUS_MODE, MHL_XDS_AVLINK_MODE_STATUS, MHL_XDS_AVLINK_MODE_CONTROL, MHL_XDS_MULTI_SINK_STATUS, MHL_XDS_SIZE }; /* Offset of XDEVSTAT registers */ #define MHL_XDS_OFFSET 0x90 #define MHL_XDS_REG(name) (MHL_XDS_OFFSET + MHL_XDS_##name) /* MHL_XDS_REG_CURR_ECBUS_MODE flags */ #define MHL_XDS_SLOT_MODE_8BIT 0x00 #define MHL_XDS_SLOT_MODE_6BIT 0x01 #define MHL_XDS_ECBUS_S 0x04 #define MHL_XDS_ECBUS_D 0x08 #define MHL_XDS_LINK_CLOCK_75MHZ 0x00 #define MHL_XDS_LINK_CLOCK_150MHZ 0x10 #define MHL_XDS_LINK_CLOCK_300MHZ 0x20 #define MHL_XDS_LINK_CLOCK_600MHZ 0x30 #define MHL_XDS_LINK_STATUS_NO_SIGNAL 0x00 #define MHL_XDS_LINK_STATUS_CRU_LOCKED 0x01 #define MHL_XDS_LINK_STATUS_TMDS_NORMAL 0x02 #define MHL_XDS_LINK_STATUS_TMDS_RESERVED 0x03 #define MHL_XDS_LINK_RATE_1_5_GBPS 0x00 #define MHL_XDS_LINK_RATE_3_0_GBPS 0x01 #define MHL_XDS_LINK_RATE_6_0_GBPS 0x02 #define MHL_XDS_ATT_CAPABLE 0x08 #define MHL_XDS_SINK_STATUS_1_HPD_LOW 0x00 #define MHL_XDS_SINK_STATUS_1_HPD_HIGH 0x01 #define MHL_XDS_SINK_STATUS_2_HPD_LOW 0x00 #define MHL_XDS_SINK_STATUS_2_HPD_HIGH 0x04 #define MHL_XDS_SINK_STATUS_3_HPD_LOW 0x00 #define MHL_XDS_SINK_STATUS_3_HPD_HIGH 0x10 #define MHL_XDS_SINK_STATUS_4_HPD_LOW 0x00 #define MHL_XDS_SINK_STATUS_4_HPD_HIGH 0x40 /* Interrupt Registers */ enum { MHL_INT_RCHANGE, MHL_INT_DCHANGE, MHL_INT_SIZE }; /* Offset of DEVSTAT registers */ #define MHL_INT_OFFSET 0x20 #define MHL_INT_REG(name) (MHL_INT_OFFSET + MHL_INT_##name) #define MHL_INT_RC_DCAP_CHG 0x01 #define MHL_INT_RC_DSCR_CHG 0x02 #define MHL_INT_RC_REQ_WRT 0x04 #define MHL_INT_RC_GRT_WRT 0x08 #define MHL_INT_RC_3D_REQ 0x10 #define MHL_INT_RC_FEAT_REQ 0x20 #define MHL_INT_RC_FEAT_COMPLETE 0x40 #define MHL_INT_DC_EDID_CHG 0x02 enum { MHL_ACK = 0x33, /* Command or Data byte acknowledge */ MHL_NACK = 0x34, /* Command or Data byte not acknowledge */ MHL_ABORT = 0x35, /* Transaction abort */ MHL_WRITE_STAT = 0xe0, /* Write one status register */ MHL_SET_INT = 0x60, /* Write one interrupt register */ MHL_READ_DEVCAP_REG = 0x61, /* Read one register */ MHL_GET_STATE = 0x62, /* Read CBUS revision level from follower */ MHL_GET_VENDOR_ID = 0x63, /* Read vendor ID value from follower */ MHL_SET_HPD = 0x64, /* Set Hot Plug Detect in follower */ MHL_CLR_HPD = 0x65, /* Clear Hot Plug Detect in follower */ MHL_SET_CAP_ID = 0x66, /* Set Capture ID for downstream device */ MHL_GET_CAP_ID = 0x67, /* Get Capture ID from downstream device */ MHL_MSC_MSG = 0x68, /* VS command to send RCP sub-commands */ MHL_GET_SC1_ERRORCODE = 0x69, /* Get Vendor-Specific error code */ MHL_GET_DDC_ERRORCODE = 0x6A, /* Get DDC channel command error code */ MHL_GET_MSC_ERRORCODE = 0x6B, /* Get MSC command error code */ MHL_WRITE_BURST = 0x6C, /* Write 1-16 bytes to responder's scratchpad */ MHL_GET_SC3_ERRORCODE = 0x6D, /* Get channel 3 command error code */ MHL_WRITE_XSTAT = 0x70, /* Write one extended status register */ MHL_READ_XDEVCAP_REG = 0x71, /* Read one extended devcap register */ /* let the rest of these float, they are software specific */ MHL_READ_EDID_BLOCK, MHL_SEND_3D_REQ_OR_FEAT_REQ, MHL_READ_DEVCAP, MHL_READ_XDEVCAP }; /* MSC message types */ enum { MHL_MSC_MSG_RCP = 0x10, /* RCP sub-command */ MHL_MSC_MSG_RCPK = 0x11, /* RCP Acknowledge sub-command */ MHL_MSC_MSG_RCPE = 0x12, /* RCP Error sub-command */ MHL_MSC_MSG_RAP = 0x20, /* Mode Change Warning sub-command */ MHL_MSC_MSG_RAPK = 0x21, /* MCW Acknowledge sub-command */ MHL_MSC_MSG_RBP = 0x22, /* Remote Button Protocol sub-command */ MHL_MSC_MSG_RBPK = 0x23, /* RBP Acknowledge sub-command */ MHL_MSC_MSG_RBPE = 0x24, /* RBP Error sub-command */ MHL_MSC_MSG_UCP = 0x30, /* UCP sub-command */ MHL_MSC_MSG_UCPK = 0x31, /* UCP Acknowledge sub-command */ MHL_MSC_MSG_UCPE = 0x32, /* UCP Error sub-command */ MHL_MSC_MSG_RUSB = 0x40, /* Request USB host role */ MHL_MSC_MSG_RUSBK = 0x41, /* Acknowledge request for USB host role */ MHL_MSC_MSG_RHID = 0x42, /* Request HID host role */ MHL_MSC_MSG_RHIDK = 0x43, /* Acknowledge request for HID host role */ MHL_MSC_MSG_ATT = 0x50, /* Request attention sub-command */ MHL_MSC_MSG_ATTK = 0x51, /* ATT Acknowledge sub-command */ MHL_MSC_MSG_BIST_TRIGGER = 0x60, MHL_MSC_MSG_BIST_REQUEST_STAT = 0x61, MHL_MSC_MSG_BIST_READY = 0x62, MHL_MSC_MSG_BIST_STOP = 0x63, }; /* RAP action codes */ #define MHL_RAP_POLL 0x00 /* Just do an ack */ #define MHL_RAP_CONTENT_ON 0x10 /* Turn content stream ON */ #define MHL_RAP_CONTENT_OFF 0x11 /* Turn content stream OFF */ #define MHL_RAP_CBUS_MODE_DOWN 0x20 #define MHL_RAP_CBUS_MODE_UP 0x21 /* RAPK status codes */ #define MHL_RAPK_NO_ERR 0x00 /* RAP action recognized & supported */ #define MHL_RAPK_UNRECOGNIZED 0x01 /* Unknown RAP action code received */ #define MHL_RAPK_UNSUPPORTED 0x02 /* Rcvd RAP action code not supported */ #define MHL_RAPK_BUSY 0x03 /* Responder too busy to respond */ /* Bit masks for RCP messages */ #define MHL_RCP_KEY_RELEASED_MASK 0x80 #define MHL_RCP_KEY_ID_MASK 0x7F /* * Error status codes for RCPE messages */ /* No error. (Not allowed in RCPE messages) */ #define MHL_RCPE_STATUS_NO_ERROR 0x00 /* Unsupported/unrecognized key code */ #define MHL_RCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01 /* Responder busy. Initiator may retry message */ #define MHL_RCPE_STATUS_BUSY 0x02 /* * Error status codes for RBPE messages */ /* No error. (Not allowed in RBPE messages) */ #define MHL_RBPE_STATUS_NO_ERROR 0x00 /* Unsupported/unrecognized button code */ #define MHL_RBPE_STATUS_INEFFECTIVE_BUTTON_CODE 0x01 /* Responder busy. Initiator may retry message */ #define MHL_RBPE_STATUS_BUSY 0x02 /* * Error status codes for UCPE messages */ /* No error. (Not allowed in UCPE messages) */ #define MHL_UCPE_STATUS_NO_ERROR 0x00 /* Unsupported/unrecognized key code */ #define MHL_UCPE_STATUS_INEFFECTIVE_KEY_CODE 0x01 enum mhl_burst_id { MHL_BURST_ID_3D_VIC = 0x10, MHL_BURST_ID_3D_DTD = 0x11, MHL_BURST_ID_HEV_VIC = 0x20, MHL_BURST_ID_HEV_DTDA = 0x21, MHL_BURST_ID_HEV_DTDB = 0x22, MHL_BURST_ID_VC_ASSIGN = 0x38, MHL_BURST_ID_VC_CONFIRM = 0x39, MHL_BURST_ID_AUD_DELAY = 0x40, MHL_BURST_ID_ADT_BURSTID = 0x41, MHL_BURST_ID_BIST_SETUP = 0x51, MHL_BURST_ID_BIST_RETURN_STAT = 0x52, MHL_BURST_ID_EMSC_SUPPORT = 0x61, MHL_BURST_ID_HID_PAYLOAD = 0x62, MHL_BURST_ID_BLK_RCV_BUFFER_INFO = 0x63, MHL_BURST_ID_BITS_PER_PIXEL_FMT = 0x64, }; struct mhl_burst_blk_rcv_buffer_info { __be16 id; __le16 size; } __packed; struct mhl3_burst_header { __be16 id; u8 checksum; u8 total_entries; u8 sequence_index; } __packed; struct mhl_burst_bits_per_pixel_fmt { struct mhl3_burst_header hdr; u8 num_entries; struct { u8 stream_id; u8 pixel_format; } __packed desc[]; } __packed; struct mhl_burst_emsc_support { struct mhl3_burst_header hdr; u8 num_entries; __be16 burst_id[]; } __packed; struct mhl_burst_audio_descr { struct mhl3_burst_header hdr; u8 flags; u8 short_desc[9]; } __packed; /* * MHL3 infoframe related definitions */ #define MHL3_IEEE_OUI 0x7ca61d #define MHL3_INFOFRAME_SIZE 15 enum mhl3_video_format { MHL3_VIDEO_FORMAT_NONE, MHL3_VIDEO_FORMAT_3D, MHL3_VIDEO_FORMAT_MULTI_VIEW, MHL3_VIDEO_FORMAT_DUAL_3D }; enum mhl3_3d_format_type { MHL3_3D_FORMAT_TYPE_FS, /* frame sequential */ MHL3_3D_FORMAT_TYPE_TB, /* top-bottom */ MHL3_3D_FORMAT_TYPE_LR, /* left-right */ MHL3_3D_FORMAT_TYPE_FS_TB, /* frame sequential, top-bottom */ MHL3_3D_FORMAT_TYPE_FS_LR, /* frame sequential, left-right */ MHL3_3D_FORMAT_TYPE_TB_LR /* top-bottom, left-right */ }; struct mhl3_infoframe { unsigned char version; enum mhl3_video_format video_format; enum mhl3_3d_format_type format_type; bool sep_audio; int hev_format; int av_delay; }; #endif /* __MHL_H__ */