0x1949 Team - FAZEMRX - MANAGER
Edit File: bash.mo
�� \ � � 0 � � � ? � � ' � � � 3 �$ � �$ 4 �& � �& I �, � �, �5 � �E 4 MJ %s: nameref variable self references not allowed Evaluate arithmetic expressions. Evaluate each ARG as an arithmetic expression. Evaluation is done in fixed-width integers with no check for overflow, though division by 0 is trapped and flagged as an error. The following list of operators is grouped into levels of equal-precedence operators. The levels are listed in order of decreasing precedence. id++, id-- variable post-increment, post-decrement ++id, --id variable pre-increment, pre-decrement -, + unary minus, plus !, ~ logical and bitwise negation ** exponentiation *, /, % multiplication, division, remainder +, - addition, subtraction <<, >> left and right bitwise shifts <=, >=, <, > comparison ==, != equality, inequality & bitwise AND ^ bitwise XOR | bitwise OR && logical AND || logical OR expr ? expr : expr conditional operator =, *=, /=, %=, +=, -=, <<=, >>=, &=, ^=, |= assignment Shell variables are allowed as operands. The name of the variable is replaced by its value (coerced to a fixed-width integer) within an expression. The variable need not have its integer attribute turned on to be used in an expression. Operators are evaluated in order of precedence. Sub-expressions in parentheses are evaluated first and may override the precedence rules above. Exit Status: If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise. General help using GNU software: <http://www.gnu.org/gethelp/> Read a line from the standard input and split it into fields. Reads a single line from the standard input, or from file descriptor FD if the -u option is supplied. The line is split into fields as with word splitting, and the first word is assigned to the first NAME, the second word to the second NAME, and so on, with any leftover words assigned to the last NAME. Only the characters found in $IFS are recognized as word delimiters. If no NAMEs are supplied, the line read is stored in the REPLY variable. Options: -a array assign the words read to sequential indices of the array variable ARRAY, starting at zero -d delim continue until the first character of DELIM is read, rather than newline -e use Readline to obtain the line -i text use TEXT as the initial text for Readline -n nchars return after reading NCHARS characters rather than waiting for a newline, but honor a delimiter if fewer than NCHARS characters are read before the delimiter -N nchars return only after reading exactly NCHARS characters, unless EOF is encountered or read times out, ignoring any delimiter -p prompt output the string PROMPT without a trailing newline before attempting to read -r do not allow backslashes to escape any characters -s do not echo input coming from a terminal -t timeout time out and return failure if a complete line of input is not read within TIMEOUT seconds. The value of the TMOUT variable is the default timeout. TIMEOUT may be a fractional number. If TIMEOUT is 0, read returns immediately, without trying to read any data, returning success only if input is available on the specified file descriptor. The exit status is greater than 128 if the timeout is exceeded -u fd read from file descriptor FD instead of the standard input Exit Status: The return code is zero, unless end-of-file is encountered, read times out (in which case it's greater than 128), a variable assignment error occurs, or an invalid file descriptor is supplied as the argument to -u. Set or unset values of shell options and positional parameters. Change the value of shell attributes and positional parameters, or display the names and values of shell variables. Options: -a Mark variables which are modified or created for export. -b Notify of job termination immediately. -e Exit immediately if a command exits with a non-zero status. -f Disable file name generation (globbing). -h Remember the location of commands as they are looked up. -k All assignment arguments are placed in the environment for a command, not just those that precede the command name. -m Job control is enabled. -n Read commands but do not execute them. -o option-name Set the variable corresponding to option-name: allexport same as -a braceexpand same as -B emacs use an emacs-style line editing interface errexit same as -e errtrace same as -E functrace same as -T hashall same as -h histexpand same as -H history enable command history ignoreeof the shell will not exit upon reading EOF interactive-comments allow comments to appear in interactive commands keyword same as -k monitor same as -m noclobber same as -C noexec same as -n noglob same as -f nolog currently accepted but ignored notify same as -b nounset same as -u onecmd same as -t physical same as -P pipefail the return value of a pipeline is the status of the last command to exit with a non-zero status, or zero if no command exited with a non-zero status posix change the behavior of bash where the default operation differs from the Posix standard to match the standard privileged same as -p verbose same as -v vi use a vi-style line editing interface xtrace same as -x -p Turned on whenever the real and effective user ids do not match. Disables processing of the $ENV file and importing of shell functions. Turning this option off causes the effective uid and gid to be set to the real uid and gid. -t Exit after reading and executing one command. -u Treat unset variables as an error when substituting. -v Print shell input lines as they are read. -x Print commands and their arguments as they are executed. -B the shell will perform brace expansion -C If set, disallow existing regular files to be overwritten by redirection of output. -E If set, the ERR trap is inherited by shell functions. -H Enable ! style history substitution. This flag is on by default when the shell is interactive. -P If set, do not resolve symbolic links when executing commands such as cd which change the current directory. -T If set, the DEBUG and RETURN traps are inherited by shell functions. -- Assign any remaining arguments to the positional parameters. If there are no remaining arguments, the positional parameters are unset. - Assign any remaining arguments to the positional parameters. The -x and -v options are turned off. Using + rather than - causes these flags to be turned off. The flags can also be used upon invocation of the shell. The current set of flags may be found in $-. The remaining n ARGs are positional parameters and are assigned, in order, to $1, $2, .. $n. If no ARGs are given, all shell variables are printed. Exit Status: Returns success unless an invalid option is given. Write arguments to the standard output. Display the ARGs, separated by a single space character and followed by a newline, on the standard output. Options: -n do not append a newline -e enable interpretation of the following backslash escapes -E explicitly suppress interpretation of backslash escapes `echo' interprets the following backslash-escaped characters: \a alert (bell) \b backspace \c suppress further output \e escape character \E escape character \f form feed \n new line \r carriage return \t horizontal tab \v vertical tab \\ backslash \0nnn the character whose ASCII code is NNN (octal). NNN can be 0 to 3 octal digits \xHH the eight-bit character whose value is HH (hexadecimal). HH can be one or two hex digits \uHHHH the Unicode character whose value is the hexadecimal value HHHH. HHHH can be one to four hex digits. \UHHHHHHHH the Unicode character whose value is the hexadecimal value HHHHHHHH. HHHHHHHH can be one to eight hex digits. Exit Status: Returns success unless a write error occurs. bash home page: <http://www.gnu.org/software/bash> Project-Id-Version: bash Report-Msgid-Bugs-To: FULL NAME <EMAIL@ADDRESS> PO-Revision-Date: 2020-12-21 01:38+0000 Last-Translator: Anthony Harrington <Unknown> Language-Team: English (United Kingdom) <en_GB@li.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Plural-Forms: nplurals=2; plural=n != 1; X-Launchpad-Export-Date: 2024-09-02 18:54+0000 X-Generator: Launchpad (build 1b1ed1ad2dbfc71ee62b5c5491c975135a771bf0) %s: nameref variable self references are not allowed Evaluate arithmetic expressions. Evaluate each ARG as an arithmetic expression. Evaluation is done in fixed-width integers with no check for overflow, though division by 0 is trapped and flagged as an error. The following list of operators is grouped into levels of equal-precedence operators. The levels are listed in order of decreasing precedence. id++, id-- variable post-increment, post-decrement ++id, --id variable pre-increment, pre-decrement -, + unary minus, plus !, ~ logical and bitwise negation ** exponentiation *, /, % multiplication, division, remainder +, - addition, subtraction <<, >> left and right bitwise shifts <=, >=, <, > comparison ==, != equality, inequality & bitwise AND ^ bitwise XOR | bitwise OR && logical AND || logical OR expr ? expr : expr conditional operator =, *=, /=, %=, +=, -=, <<=, >>=, &=, ^=, |= assignment Shell variables are allowed as operands. The name of the variable is replaced by its value (coerced to a fixed-width integer) within an expression. The variable need not have its integer attribute turned on to be used in an expression. Operators are evaluated in order of precedence. Sub-expressions in brackets are evaluated first and may override the precedence rules above. Exit Status: If the last ARG evaluates to 0, let returns 1; let returns 0 otherwise. General help using GNU software: <https://www.gnu.org/help/gethelp.html> Read a line from the standard input and split it into fields. Reads a single line from the standard input, or from file descriptor FD if the -u option is supplied. The line is split into fields as with word splitting, and the first word is assigned to the first NAME, the second word to the second NAME, and so on, with any leftover words assigned to the last NAME. Only the characters found in $IFS are recognised as word delimiters. If no NAMEs are supplied, the line read is stored in the REPLY variable. Options: -a array assign the words read to sequential indices of the array variable ARRAY, starting at zero -d delim continue until the first character of DELIM is read, rather than newline -e use Readline to obtain the line -i text use TEXT as the initial text for Readline -n nchars return after reading NCHARS characters rather than waiting for a newline, but honor a delimiter if fewer than NCHARS characters are read before the delimiter -N nchars return only after reading exactly NCHARS characters, unless EOF is encountered or read times out, ignoring any delimiter -p prompt output the string PROMPT without a trailing newline before attempting to read -r do not allow backslashes to escape any characters -s do not echo input coming from a terminal -t timeout time out and return failure if a complete line of input is not read within TIMEOUT seconds. The value of the TMOUT variable is the default timeout. TIMEOUT may be a fractional number. If TIMEOUT is 0, read returns immediately, without trying to read any data, returning success only if input is available on the specified file descriptor. The exit status is greater than 128 if the timeout is exceeded -u fd read from file descriptor FD instead of the standard input Exit Status: The return code is zero, unless end-of-file is encountered, read times out (in which case it's greater than 128), a variable assignment error occurs, or an invalid file descriptor is supplied as the argument to -u. Set or unset values of shell options and positional parameters. Change the value of shell attributes and positional parameters, or display the names and values of shell variables. Options: -a Mark variables which are modified or created for export. -b Notify of job termination immediately. -e Exit immediately if a command exits with a non-zero status. -f Disable file name generation (globbing). -h Remember the location of commands as they are looked up. -k All assignment arguments are placed in the environment for a command, not just those that precede the command name. -m Job control is enabled. -n Read commands but do not execute them. -o option-name Set the variable corresponding to option-name: allexport same as -a braceexpand same as -B emacs use an emacs-style line editing interface errexit same as -e errtrace same as -E functrace same as -T hashall same as -h histexpand same as -H history enable command history ignoreeof the shell will not exit upon reading EOF interactive-comments allow comments to appear in interactive commands keyword same as -k monitor same as -m noclobber same as -C noexec same as -n noglob same as -f nolog currently accepted but ignored notify same as -b nounset same as -u onecmd same as -t physical same as -P pipefail the return value of a pipeline is the status of the last command to exit with a non-zero status, or zero if no command exited with a non-zero status posix change the behaviour of bash where the default operation differs from the Posix standard to match the standard privileged same as -p verbose same as -v vi use a vi-style line editing interface xtrace same as -x -p Turned on whenever the real and effective user ids do not match. Disables processing of the $ENV file and importing of shell functions. Turning this option off causes the effective uid and gid to be set to the real uid and gid. -t Exit after reading and executing one command. -u Treat unset variables as an error when substituting. -v Print shell input lines as they are read. -x Print commands and their arguments as they are executed. -B the shell will perform brace expansion -C If set, disallow existing regular files to be overwritten by redirection of output. -E If set, the ERR trap is inherited by shell functions. -H Enable ! style history substitution. This flag is on by default when the shell is interactive. -P If set, do not resolve symbolic links when executing commands such as cd which change the current directory. -T If set, the DEBUG and RETURN traps are inherited by shell functions. -- Assign any remaining arguments to the positional parameters. If there are no remaining arguments, the positional parameters are unset. - Assign any remaining arguments to the positional parameters. The -x and -v options are turned off. Using + rather than - causes these flags to be turned off. The flags can also be used upon invocation of the shell. The current set of flags may be found in $-. The remaining n ARGs are positional parameters and are assigned, in order, to $1, $2, .. $n. If no ARGs are given, all shell variables are printed. Exit Status: Returns success unless an invalid option is given. Write arguments to the standard output. Display the ARGs, separated by a single space character and followed by a newline, on the standard output. Options: -n do not append a newline -e enable interpretation of the following backslash escapes -E explicitly suppress interpretation of backslash escapes `echo' interprets the following backslash-escaped characters: \a alert (bell) \b backspace \c suppress further output \e escape character \E escape character \f form feed \n new line \r carriage return \t horizontal tab \v vertical tab \[tab]backslash \0nnn the character whose ASCII code is NNN (octal). NNN can be 0 to 3 octal digits \xHH the eight-bit character whose value is HH (hexadecimal). HH can be one or two hex digits \uHHHH the Unicode character whose value is the hexadecimal value HHHH. HHHH can be one to four hex digits. \UHHHHHHHH the Unicode character whose value is the hexadecimal value HHHHHHHH. HHHHHHHH can be one to eight hex digits. Exit Status: Returns success unless a write error occurs. bash home page: <https://www.gnu.org/software/bash>