0x1949 Team - FAZEMRX - MANAGER

Edit File: Kconfig

# SPDX-License-Identifier: GPL-2.0-only # ALSA ISA drivers config SND_WSS_LIB tristate select SND_PCM select SND_TIMER config SND_SB_COMMON tristate config SND_SB8_DSP tristate select SND_PCM select SND_SB_COMMON config SND_SB16_DSP tristate select SND_PCM select SND_SB_COMMON menuconfig SND_ISA bool "ISA sound devices" depends on ISA || COMPILE_TEST depends on ISA_DMA_API && !M68K default y help Support for sound devices connected via the ISA bus. if SND_ISA config SND_ADLIB tristate "AdLib FM card" select SND_OPL3_LIB help Say Y here to include support for AdLib FM cards. To compile this driver as a module, choose M here: the module will be called snd-adlib. config SND_AD1816A tristate "Analog Devices SoundPort AD1816A" depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM select SND_TIMER help Say Y here to include support for Analog Devices SoundPort AD1816A or compatible sound chips. To compile this driver as a module, choose M here: the module will be called snd-ad1816a. config SND_AD1848 tristate "Generic AD1848/CS4248 driver" select SND_WSS_LIB help Say Y here to include support for AD1848 (Analog Devices) or CS4248 (Cirrus Logic - Crystal Semiconductors) chips. For newer chips from Cirrus Logic, use the CS4231 or CS4232+ drivers. To compile this driver as a module, choose M here: the module will be called snd-ad1848. config SND_ALS100 tristate "Diamond Tech. DT-019x and Avance Logic ALSxxx" depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART select SND_SB16_DSP help Say Y here to include support for soundcards based on the Diamond Technologies DT-019X or Avance Logic chips: ALS007, ALS100, ALS110, ALS120 and ALS200 chips. To compile this driver as a module, choose M here: the module will be called snd-als100. config SND_AZT1605 tristate "Aztech AZT1605 Driver" depends on SND select SND_WSS_LIB select SND_MPU401_UART select SND_OPL3_LIB help Say Y here to include support for Aztech Sound Galaxy cards based on the AZT1605 chipset. To compile this driver as a module, choose M here: the module will be called snd-azt1605. config SND_AZT2316 tristate "Aztech AZT2316 Driver" depends on SND select SND_WSS_LIB select SND_MPU401_UART select SND_OPL3_LIB help Say Y here to include support for Aztech Sound Galaxy cards based on the AZT2316 chipset. To compile this driver as a module, choose M here: the module will be called snd-azt2316. config SND_AZT2320 tristate "Aztech Systems AZT2320" depends on PNP select ISAPNP select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for soundcards based on the Aztech Systems AZT2320 chip. To compile this driver as a module, choose M here: the module will be called snd-azt2320. config SND_CMI8328 tristate "C-Media CMI8328" select SND_WSS_LIB select SND_OPL3_LIB select SND_MPU401_UART help Say Y here to include support for soundcards based on the C-Media CMI8328 chip. To compile this driver as a module, choose M here: the module will be called snd-cmi8328. config SND_CMI8330 tristate "C-Media CMI8330" select SND_WSS_LIB select SND_SB16_DSP select SND_OPL3_LIB select SND_MPU401_UART help Say Y here to include support for soundcards based on the C-Media CMI8330 chip. To compile this driver as a module, choose M here: the module will be called snd-cmi8330. config SND_CS4231 tristate "Generic Cirrus Logic CS4231 driver" select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for CS4231 chips from Cirrus Logic - Crystal Semiconductors. To compile this driver as a module, choose M here: the module will be called snd-cs4231. config SND_CS4236 tristate "Generic Cirrus Logic CS4232/CS4236+ driver" select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y to include support for CS4232,CS4235,CS4236,CS4237B, CS4238B,CS4239 chips from Cirrus Logic - Crystal Semiconductors. To compile this driver as a module, choose M here: the module will be called snd-cs4236. config SND_ES1688 tristate "Generic ESS ES688/ES1688 and ES968 PnP driver" select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM help Say Y here to include support for ESS AudioDrive ES688 or ES1688 chips. Also, this module support cards with ES968 PnP chip. To compile this driver as a module, choose M here: the module will be called snd-es1688. config SND_ES18XX tristate "Generic ESS ES18xx driver" select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM help Say Y here to include support for ESS AudioDrive ES18xx chips. To compile this driver as a module, choose M here: the module will be called snd-es18xx. config SND_SC6000 tristate "Gallant SC-6000/6600/7000 and Audio Excel DSP 16" depends on HAS_IOPORT_MAP select SND_WSS_LIB select SND_OPL3_LIB select SND_MPU401_UART help Say Y here to include support for Gallant SC-6000, SC-6600, SC-7000 cards and clones: Audio Excel DSP 16 and Zoltrix AV302. These cards are based on CompuMedia ASC-9308 or ASC-9408 chips. To compile this driver as a module, choose M here: the module will be called snd-sc6000. config SND_GUSCLASSIC tristate "Gravis UltraSound Classic" select SND_RAWMIDI select SND_PCM select SND_TIMER help Say Y here to include support for Gravis UltraSound Classic soundcards. To compile this driver as a module, choose M here: the module will be called snd-gusclassic. config SND_GUSEXTREME tristate "Gravis UltraSound Extreme" select SND_OPL3_LIB select SND_MPU401_UART select SND_PCM select SND_TIMER help Say Y here to include support for Gravis UltraSound Extreme soundcards. To compile this driver as a module, choose M here: the module will be called snd-gusextreme. config SND_GUSMAX tristate "Gravis UltraSound MAX" select SND_RAWMIDI select SND_WSS_LIB help Say Y here to include support for Gravis UltraSound MAX soundcards. To compile this driver as a module, choose M here: the module will be called snd-gusmax. config SND_INTERWAVE tristate "AMD InterWave, Gravis UltraSound PnP" depends on PNP select SND_RAWMIDI select SND_WSS_LIB help Say Y here to include support for AMD InterWave based soundcards (Gravis UltraSound Plug & Play, STB SoundRage32, MED3210, Dynasonic Pro, Panasonic PCA761AW). To compile this driver as a module, choose M here: the module will be called snd-interwave. config SND_INTERWAVE_STB tristate "AMD InterWave + TEA6330T (UltraSound 32-Pro)" depends on PNP select SND_RAWMIDI select SND_WSS_LIB help Say Y here to include support for AMD InterWave based soundcards with a TEA6330T bass and treble regulator (UltraSound 32-Pro). To compile this driver as a module, choose M here: the module will be called snd-interwave-stb. config SND_JAZZ16 tristate "Media Vision Jazz16 card and compatibles" select SND_OPL3_LIB select SND_MPU401_UART select SND_SB8_DSP help Say Y here to include support for soundcards based on the Media Vision Jazz16 chipset: digital chip MVD1216 (Jazz16), codec MVA416 (CS4216) and mixer MVA514 (ICS2514). Media Vision's Jazz16 cards were sold under names Pro Sonic 16, Premium 3-D and Pro 3-D. There were also OEMs cards with the Jazz16 chipset. To compile this driver as a module, choose M here: the module will be called snd-jazz16. config SND_OPL3SA2 tristate "Yamaha OPL3-SA2/SA3" select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for Yamaha OPL3-SA2 and OPL3-SA3 chips. To compile this driver as a module, choose M here: the module will be called snd-opl3sa2. config SND_OPTI92X_AD1848 tristate "OPTi 82C92x - AD1848" select SND_OPL3_LIB select SND_OPL4_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for soundcards based on Opti 82C92x or OTI-601 chips and using an AD1848 codec. To compile this driver as a module, choose M here: the module will be called snd-opti92x-ad1848. config SND_OPTI92X_CS4231 tristate "OPTi 82C92x - CS4231" select SND_OPL3_LIB select SND_OPL4_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for soundcards based on Opti 82C92x chips and using a CS4231 codec. To compile this driver as a module, choose M here: the module will be called snd-opti92x-cs4231. config SND_OPTI93X tristate "OPTi 82C93x" select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for soundcards based on Opti 82C93x chips. To compile this driver as a module, choose M here: the module will be called snd-opti93x. config SND_MIRO tristate "Miro miroSOUND PCM1pro/PCM12/PCM20radio driver" select SND_OPL4_LIB select SND_WSS_LIB select SND_MPU401_UART select SND_PCM help Say 'Y' or 'M' to include support for Miro miroSOUND PCM1 pro, miroSOUND PCM12 and miroSOUND PCM20 Radio soundcards. To compile this driver as a module, choose M here: the module will be called snd-miro. config SND_SB8 tristate "Sound Blaster 1.0/2.0/Pro (8-bit)" select SND_OPL3_LIB select SND_RAWMIDI select SND_SB8_DSP help Say Y here to include support for Creative Sound Blaster 1.0/ 2.0/Pro (8-bit) or 100% compatible soundcards. To compile this driver as a module, choose M here: the module will be called snd-sb8. config SND_SB16 tristate "Sound Blaster 16 (PnP)" select SND_OPL3_LIB select SND_MPU401_UART select SND_SB16_DSP help Say Y here to include support for Sound Blaster 16 soundcards (including the Plug and Play version). To compile this driver as a module, choose M here: the module will be called snd-sb16. config SND_SBAWE tristate "Sound Blaster AWE (32,64) (PnP)" select SND_OPL3_LIB select SND_MPU401_UART select SND_SB16_DSP select SND_SEQ_DEVICE if SND_SEQUENCER != n help Say Y here to include support for Sound Blaster AWE soundcards (including the Plug and Play version). To compile this driver as a module, choose M here: the module will be called snd-sbawe. # select SEQ stuff to min(SND_SEQUENCER,SND_XXX) config SND_SBAWE_SEQ def_tristate SND_SEQUENCER && SND_SBAWE select SND_SEQ_MIDI_EMUL select SND_SEQ_VIRMIDI select SND_SYNTH_EMUX config SND_SB16_CSP bool "Sound Blaster 16/AWE CSP support" depends on (SND_SB16 || SND_SBAWE) && (BROKEN || !PPC) select FW_LOADER help Say Y here to include support for the CSP core. This special coprocessor can do variable tasks like various compression and decompression algorithms. config SND_SSCAPE tristate "Ensoniq SoundScape driver" select SND_MPU401_UART select SND_WSS_LIB select FW_LOADER help Say Y here to include support for Ensoniq SoundScape and Ensoniq OEM soundcards. The PCM audio is supported on SoundScape Classic, Elite, PnP and VIVO cards. The supported OEM cards are SPEA Media FX and Reveal SC-600. The MIDI support is very experimental and requires binary firmware files called "scope.cod" and "sndscape.co?" where the ? is digit 0, 1, 2, 3 or 4. The firmware files can be found in DOS or Windows driver packages. One has to put the firmware files into the /lib/firmware directory. To compile this driver as a module, choose M here: the module will be called snd-sscape. config SND_WAVEFRONT tristate "Turtle Beach Maui,Tropez,Tropez+ (Wavefront)" select FW_LOADER select SND_OPL3_LIB select SND_MPU401_UART select SND_WSS_LIB help Say Y here to include support for Turtle Beach Maui, Tropez and Tropez+ soundcards based on the Wavefront chip. To compile this driver as a module, choose M here: the module will be called snd-wavefront. config SND_MSND_PINNACLE tristate "Turtle Beach MultiSound Pinnacle/Fiji driver" depends on X86 select FW_LOADER select SND_MPU401_UART select SND_PCM help Say Y to include support for Turtle Beach MultiSound Pinnacle/ Fiji soundcards. To compile this driver as a module, choose M here: the module will be called snd-msnd-pinnacle. config SND_MSND_CLASSIC tristate "Support for Turtle Beach MultiSound Classic, Tahiti, Monterey" depends on X86 select FW_LOADER select SND_MPU401_UART select SND_PCM help Say M here if you have a Turtle Beach MultiSound Classic, Tahiti or Monterey (not for the Pinnacle or Fiji). See <file:Documentation/sound/cards/multisound.sh> for important information about this driver. Note that it has been discontinued, but the Voyetra Turtle Beach knowledge base entry for it is still available at <http://www.turtlebeach.com/site/kb_ftp/790.asp>. To compile this driver as a module, choose M here: the module will be called snd-msnd-classic. endif # SND_ISA