0x1949 Team - FAZEMRX - MANAGER

Edit File: Kconfig

# SPDX-License-Identifier: GPL-2.0 config BCMA_POSSIBLE bool depends on HAS_IOMEM && HAS_DMA default y menuconfig BCMA tristate "Broadcom specific AMBA" depends on BCMA_POSSIBLE help Bus driver for Broadcom specific Advanced Microcontroller Bus Architecture. if BCMA # Support for Block-I/O. SELECT this from the driver that needs it. config BCMA_BLOCKIO bool config BCMA_HOST_PCI_POSSIBLE bool depends on PCI = y default y config BCMA_HOST_PCI bool "Support for BCMA on PCI-host bus" depends on BCMA_HOST_PCI_POSSIBLE select BCMA_DRIVER_PCI default y config BCMA_HOST_SOC bool "Support for BCMA in a SoC" depends on HAS_IOMEM help Host interface for a Broadcom AIX bus directly mapped into the memory. This only works with the Broadcom SoCs from the BCM47XX line. If unsure, say N config BCMA_DRIVER_PCI bool "BCMA Broadcom PCI core driver" depends on PCI default y help BCMA bus may have many versions of PCIe core. This driver supports: 1) PCIe core working in clientmode 2) PCIe Gen 2 clientmode core In general PCIe (Gen 2) clientmode core is required on PCIe hosted buses. It's responsible for initialization and basic hardware management. This driver is also prerequisite for a hostmode PCIe core support. config BCMA_DRIVER_PCI_HOSTMODE bool "Driver for PCI core working in hostmode" depends on MIPS && BCMA_DRIVER_PCI && PCI_DRIVERS_LEGACY && BCMA = y help PCI core hostmode operation (external PCI bus). config BCMA_DRIVER_MIPS bool "BCMA Broadcom MIPS core driver" depends on MIPS || COMPILE_TEST help Driver for the Broadcom MIPS core attached to Broadcom specific Advanced Microcontroller Bus. If unsure, say N config BCMA_PFLASH bool depends on BCMA_DRIVER_MIPS default y config BCMA_SFLASH bool "ChipCommon-attached serial flash support" depends on BCMA_HOST_SOC default y help Some cheap devices have serial flash connected to the ChipCommon instead of independent SPI controller. It requires using a separated driver that implements ChipCommon specific interface communication. Enabling this symbol will let bcma recognize serial flash and register it as platform device. config BCMA_NFLASH bool depends on BCMA_DRIVER_MIPS default y config BCMA_DRIVER_GMAC_CMN bool "BCMA Broadcom GBIT MAC COMMON core driver" help Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom specific Advanced Microcontroller Bus. If unsure, say N config BCMA_DRIVER_GPIO bool "BCMA GPIO driver" depends on GPIOLIB select GPIOLIB_IRQCHIP if BCMA_HOST_SOC help Driver to provide access to the GPIO pins of the bcma bus. If unsure, say N config BCMA_DEBUG bool "BCMA debugging" help This turns on additional debugging messages. If unsure, say N endif # BCMA