0x1949 Team - FAZEMRX - MANAGER

Edit File: Kconfig

# SPDX-License-Identifier: GPL-2.0-only # # X86 Platform Specific Drivers # menuconfig X86_PLATFORM_DEVICES bool "X86 Platform Specific Device Drivers" default y depends on X86 help Say Y here to get to see options for device drivers for various x86 platforms, including vendor-specific laptop extension drivers. This option alone does not add any kernel code. If you say N, all options in this submenu will be skipped and disabled. if X86_PLATFORM_DEVICES config ACPI_WMI tristate "WMI" depends on ACPI help This driver adds support for the ACPI-WMI (Windows Management Instrumentation) mapper device (PNP0C14) found on some systems. ACPI-WMI is a proprietary extension to ACPI to expose parts of the ACPI firmware to userspace - this is done through various vendor defined methods and data blocks in a PNP0C14 device, which are then made available for userspace to call. The implementation of this in Linux currently only exposes this to other kernel space drivers. This driver is a required dependency to build the firmware specific drivers needed on many machines, including Acer and HP laptops. It is safe to enable this driver even if your DSDT doesn't define any ACPI-WMI devices. config WMI_BMOF tristate "WMI embedded Binary MOF driver" depends on ACPI_WMI default ACPI_WMI help Say Y here if you want to be able to read a firmware-embedded WMI Binary MOF data. Using this requires userspace tools and may be rather tedious. To compile this driver as a module, choose M here: the module will be called wmi-bmof. config HUAWEI_WMI tristate "Huawei WMI laptop extras driver" depends on ACPI_BATTERY depends on ACPI_WMI depends on INPUT select INPUT_SPARSEKMAP select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_AUDIO select NEW_LEDS help This driver provides support for Huawei WMI hotkeys, battery charge control, fn-lock, mic-mute LED, and other extra features. To compile this driver as a module, choose M here: the module will be called huawei-wmi. config UV_SYSFS tristate "Sysfs structure for UV systems" depends on X86_UV depends on SYSFS help This driver supports a sysfs tree describing information about UV systems at /sys/firmware/sgi_uv/. To compile this driver as a module, choose M here: the module will be called uv_sysfs. config MXM_WMI tristate "WMI support for MXM Laptop Graphics" depends on ACPI_WMI help MXM is a standard for laptop graphics cards, the WMI interface is required for switchable nvidia graphics machines config PEAQ_WMI tristate "PEAQ 2-in-1 WMI hotkey driver" depends on ACPI_WMI depends on INPUT help Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s. config NVIDIA_WMI_EC_BACKLIGHT tristate "EC Backlight Driver for Hybrid Graphics Notebook Systems" depends on ACPI_WMI depends on BACKLIGHT_CLASS_DEVICE help This driver provides a sysfs backlight interface for notebook systems which are equipped with NVIDIA hybrid graphics and drive LCD backlight levels through the Embedded Controller (EC). Say Y or M here if you want to control the backlight on a notebook system with an EC-driven backlight. If you choose to compile this driver as a module the module will be called nvidia-wmi-ec-backlight. config XIAOMI_WMI tristate "Xiaomi WMI key driver" depends on ACPI_WMI depends on INPUT help Say Y here if you want to support WMI-based keys on Xiaomi notebooks. To compile this driver as a module, choose M here: the module will be called xiaomi-wmi. config GIGABYTE_WMI tristate "Gigabyte WMI temperature driver" depends on ACPI_WMI depends on HWMON help Say Y here if you want to support WMI-based temperature reporting on Gigabyte mainboards. To compile this driver as a module, choose M here: the module will be called gigabyte-wmi. config ACERHDF tristate "Acer Aspire One temperature and fan driver" depends on ACPI && THERMAL select THERMAL_GOV_BANG_BANG help This is a driver for Acer Aspire One netbooks. It allows to access the temperature sensor and to control the fan. After loading this driver the BIOS is still in control of the fan. To let the kernel handle the fan, do: echo -n enabled > /sys/class/thermal/thermal_zoneN/mode where N=0,1,2... depending on the number of thermal nodes and the detection order of your particular system. The "type" parameter in the same node directory will tell you if it is "acerhdf". For more information about this driver see <https://piie.net/files/acerhdf_README.txt> If you have an Acer Aspire One netbook, say Y or M here. config ACER_WIRELESS tristate "Acer Wireless Radio Control Driver" depends on ACPI depends on INPUT help The Acer Wireless Radio Control handles the airplane mode hotkey present on new Acer laptops. Say Y or M here if you have an Acer notebook with an airplane mode hotkey. If you choose to compile this driver as a module the module will be called acer-wireless. config ACER_WMI tristate "Acer WMI Laptop Extras" depends on ACPI select LEDS_CLASS select NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE depends on SERIO_I8042 depends on INPUT depends on RFKILL || RFKILL = n depends on ACPI_WMI select INPUT_SPARSEKMAP # Acer WMI depends on ACPI_VIDEO when ACPI is enabled select ACPI_VIDEO if ACPI help This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, exposes the mail LED and LCD backlight. If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M here. config AMD_PMC tristate "AMD SoC PMC driver" depends on ACPI && PCI select SERIO help The driver provides support for AMD Power Management Controller primarily responsible for S2Idle transactions that are driven from a platform firmware running on SMU. This driver also provides a debug mechanism to investigate the S2Idle transactions and failures. Say Y or M here if you have a notebook powered by AMD RYZEN CPU/APU. If you choose to compile this driver as a module the module will be called amd-pmc. config ADV_SWBUTTON tristate "Advantech ACPI Software Button Driver" depends on ACPI && INPUT help Say Y here to enable support for Advantech software defined button feature. More information can be found at <http://www.advantech.com.tw/products/> To compile this driver as a module, choose M here. The module will be called adv_swbutton. config APPLE_GMUX tristate "Apple Gmux Driver" depends on ACPI && PCI depends on PNP depends on BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE depends on ACPI_VIDEO=n || ACPI_VIDEO help This driver provides support for the gmux device found on many Apple laptops, which controls the display mux for the hybrid graphics as well as the backlight. Currently only backlight control is supported by the driver. config ASUS_LAPTOP tristate "Asus Laptop Extras" depends on ACPI select LEDS_CLASS select NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE depends on INPUT depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP help This is a driver for Asus laptops, Lenovo SL and the Pegatron Lucid tablet. It may also support some MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate standard ACPI events and input events, and on the Lucid the built-in accelerometer appears as an input device. It also adds support for video output switching, LCD backlight control, Bluetooth and Wlan control, and most importantly, allows you to blink those fancy LEDs. For more information see <http://acpi4asus.sf.net>. If you have an ACPI-compatible ASUS laptop, say Y or M here. config ASUS_WIRELESS tristate "Asus Wireless Radio Control Driver" depends on ACPI depends on INPUT select NEW_LEDS select LEDS_CLASS help The Asus Wireless Radio Control handles the airplane mode hotkey present on some Asus laptops. Say Y or M here if you have an ASUS notebook with an airplane mode hotkey. If you choose to compile this driver as a module the module will be called asus-wireless. config ASUS_WMI tristate "ASUS WMI Driver" depends on ACPI_WMI depends on ACPI_BATTERY depends on INPUT depends on HWMON depends on BACKLIGHT_CLASS_DEVICE depends on RFKILL || RFKILL = n depends on HOTPLUG_PCI depends on ACPI_VIDEO || ACPI_VIDEO = n depends on SERIO_I8042 || SERIO_I8042 = n select INPUT_SPARSEKMAP select LEDS_CLASS select NEW_LEDS select ACPI_PLATFORM_PROFILE help Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new Asus Notebooks). To compile this driver as a module, choose M here: the module will be called asus-wmi. config ASUS_NB_WMI tristate "Asus Notebook WMI Driver" depends on ASUS_WMI help This is a driver for newer Asus notebooks. It adds extra features like wireless radio and bluetooth control, leds, hotkeys, backlight... For more information, see <file:Documentation/ABI/testing/sysfs-platform-asus-wmi> If you have an ACPI-WMI compatible Asus Notebook, say Y or M here. config MERAKI_MX100 tristate "Cisco Meraki MX100 Platform Driver" depends on GPIOLIB depends on GPIO_ICH depends on LEDS_CLASS select LEDS_GPIO help This driver provides support for the front button and LEDs on the Cisco Meraki MX100 (Tinkerbell) 1U appliance. To compile this driver as a module, choose M here: the module will be called meraki-mx100. config EEEPC_LAPTOP tristate "Eee PC Hotkey Driver" depends on ACPI depends on INPUT depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on HOTPLUG_PCI depends on BACKLIGHT_CLASS_DEVICE select HWMON select LEDS_CLASS select NEW_LEDS select INPUT_SPARSEKMAP help This driver supports the Fn-Fx keys on Eee PC laptops. It also gives access to some extra laptop functionalities like Bluetooth, backlight and allows powering on/off some other devices. If you have an Eee PC laptop, say Y or M here. If this driver doesn't work on your Eee PC, try eeepc-wmi instead. config EEEPC_WMI tristate "Eee PC WMI Driver" depends on ASUS_WMI help This is a driver for newer Eee PC laptops. It adds extra features like wireless radio and bluetooth control, leds, hotkeys, backlight... For more information, see <file:Documentation/ABI/testing/sysfs-platform-asus-wmi> If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M here. source "drivers/platform/x86/dell/Kconfig" config AMILO_RFKILL tristate "Fujitsu-Siemens Amilo rfkill support" depends on RFKILL depends on SERIO_I8042 help This is a driver for enabling wifi on some Fujitsu-Siemens Amilo laptops. config DELL_UART_BACKLIGHT tristate "Dell AIO UART Backlight driver" depends on SERIAL_8250 depends on ACPI help Say Y here if you want to support Dell AIO UART backlight interface. The Dell AIO machines released after 2017 come with a UART interface to communicate with the backlight scalar board. This driver creates a standard backlight interface and talks to the scalar board through UART to adjust the AIO screen brightness. To compile this driver as a module, choose M here: the module will be called dell_uart_backlight. config FUJITSU_LAPTOP tristate "Fujitsu Laptop Extras" depends on ACPI depends on INPUT depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS help This is a driver for laptops built by Fujitsu: * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks * Possibly other Fujitsu laptop models * Tested with S6410 and S7020 It adds support for LCD brightness control and some hotkeys. If you have a Fujitsu laptop, say Y or M here. config FUJITSU_TABLET tristate "Fujitsu Tablet Extras" depends on ACPI depends on INPUT help This is a driver for tablets built by Fujitsu: * Lifebook P1510/P1610/P1620/Txxxx * Stylistic ST5xxx * Possibly other Fujitsu tablet models It adds support for the panel buttons, docking station detection, tablet/notebook mode detection for convertible and orientation detection for docked slates. If you have a Fujitsu convertible or slate, say Y or M here. config GPD_POCKET_FAN tristate "GPD Pocket Fan Controller support" depends on ACPI depends on THERMAL help Driver for the GPD Pocket vendor specific FAN02501 ACPI device which controls the fan speed on the GPD Pocket. Without this driver the fan on the Pocket will stay off independent of the CPU temperature. Say Y or M if the kernel may be used on a GPD pocket. source "drivers/platform/x86/hp/Kconfig" config WIRELESS_HOTKEY tristate "Wireless hotkey button" depends on ACPI depends on INPUT help This driver provides supports for the wireless buttons found on some AMD, HP, & Xioami laptops. On such systems the driver should load automatically (via ACPI alias). To compile this driver as a module, choose M here: the module will be called wireless-hotkey. config IBM_RTL tristate "Device driver to enable PRTL support" depends on PCI help Enable support for IBM Premium Real Time Mode (PRTM). This module will allow you the enter and exit PRTM in the BIOS via sysfs on platforms that support this feature. System in PRTM will not receive CPU-generated SMIs for recoverable errors. Use of this feature without proper support may void your hardware warranty. If the proper BIOS support is found the driver will load and create /sys/devices/system/ibm_rtl/. The "state" variable will indicate whether or not the BIOS is in PRTM. state = 0 (BIOS SMIs on) state = 1 (BIOS SMIs off) config IDEAPAD_LAPTOP tristate "Lenovo IdeaPad Laptop Extras" depends on ACPI depends on RFKILL && INPUT depends on SERIO_I8042 depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO || ACPI_VIDEO = n depends on ACPI_WMI || ACPI_WMI = n select ACPI_PLATFORM_PROFILE select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS help This is a driver for Lenovo IdeaPad netbooks contains drivers for rfkill switch, hotkey, fan control and backlight control. config SENSORS_HDAPS tristate "Thinkpad Hard Drive Active Protection System (hdaps)" depends on INPUT help This driver provides support for the IBM Hard Drive Active Protection System (hdaps), which provides an accelerometer and other misc. data. ThinkPads starting with the R50, T41, and X40 are supported. The accelerometer data is readable via sysfs. This driver also provides an absolute input class device, allowing the laptop to act as a pinball machine-esque joystick. If your ThinkPad is not recognized by the driver, please update to latest BIOS. This is especially the case for some R52 ThinkPads. Say Y here if you have an applicable laptop and want to experience the awesome power of hdaps. config THINKPAD_ACPI tristate "ThinkPad ACPI Laptop Extras" depends on ACPI depends on ACPI_BATTERY depends on INPUT depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on BACKLIGHT_CLASS_DEVICE depends on I2C select ACPI_PLATFORM_PROFILE select HWMON select NVRAM select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS select LEDS_TRIGGER_AUDIO help This is a driver for the IBM and Lenovo ThinkPad laptops. It adds support for Fn-Fx key combinations, Bluetooth control, video output switching, ThinkLight control, UltraBay eject and more. For more information about this driver see <file:Documentation/admin-guide/laptops/thinkpad-acpi.rst> and <http://ibm-acpi.sf.net/> . This driver was formerly known as ibm-acpi. Extra functionality will be available if the rfkill (CONFIG_RFKILL) and/or ALSA (CONFIG_SND) subsystems are available in the kernel. Note that if you want ThinkPad-ACPI to be built-in instead of modular, ALSA and rfkill will also have to be built-in. If you have an IBM or Lenovo ThinkPad laptop, say Y or M here. config THINKPAD_ACPI_ALSA_SUPPORT bool "Console audio control ALSA interface" depends on THINKPAD_ACPI depends on SND depends on SND = y || THINKPAD_ACPI = SND default y help Enables monitoring of the built-in console audio output control (headphone and speakers), which is operated by the mute and (in some ThinkPad models) volume hotkeys. If this option is enabled, ThinkPad-ACPI will export an ALSA card with a single read-only mixer control, which should be used for on-screen-display feedback purposes by the Desktop Environment. Optionally, the driver will also allow software control (the ALSA mixer will be made read-write). Please refer to the driver documentation for details. All IBM models have both volume and mute control. Newer Lenovo models only have mute control (the volume hotkeys are just normal keys and volume control is done through the main HDA mixer). config THINKPAD_ACPI_DEBUGFACILITIES bool "Maintainer debug facilities" depends on THINKPAD_ACPI help Enables extra stuff in the thinkpad-acpi which is completely useless for normal use. Read the driver source to find out what it does. Say N here, unless you were told by a kernel maintainer to do otherwise. config THINKPAD_ACPI_DEBUG bool "Verbose debug mode" depends on THINKPAD_ACPI help Enables extra debugging information, at the expense of a slightly increase in driver size. If you are not sure, say N here. config THINKPAD_ACPI_UNSAFE_LEDS bool "Allow control of important LEDs (unsafe)" depends on THINKPAD_ACPI help Overriding LED state on ThinkPads can mask important firmware alerts (like critical battery condition), or misled the user into damaging the hardware (undocking or ejecting the bay while buses are still active), etc. LED control on the ThinkPad is write-only (with very few exceptions on very ancient models), which makes it impossible to know beforehand if important information will be lost when one changes LED state. Users that know what they are doing can enable this option and the driver will allow control of every LED, including the ones on the dock stations. Never enable this option on a distribution kernel. Say N here, unless you are building a kernel for your own use, and need to control the important firmware LEDs. config THINKPAD_ACPI_VIDEO bool "Video output control support" depends on THINKPAD_ACPI default y help Allows the thinkpad_acpi driver to provide an interface to control the various video output ports. This feature often won't work well, depending on ThinkPad model, display state, video output devices in use, whether there is a X server running, phase of the moon, and the current mood of Schroedinger's cat. If you can use X.org's RandR to control your ThinkPad's video output ports instead of this feature, don't think twice: do it and say N here to save memory and avoid bad interactions with X.org. NOTE: access to this feature is limited to processes with the CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms where it interacts badly with X.org. If you are not sure, say Y here but do try to check if you could be using X.org RandR instead. config THINKPAD_ACPI_HOTKEY_POLL bool "Support NVRAM polling for hot keys" depends on THINKPAD_ACPI default y help Some thinkpad models benefit from NVRAM polling to detect a few of the hot key press events. If you know your ThinkPad model does not need to do NVRAM polling to support any of the hot keys you use, unselecting this option will save about 1kB of memory. ThinkPads T40 and newer, R52 and newer, and X31 and newer are unlikely to need NVRAM polling in their latest BIOS versions. NVRAM polling can detect at most the following keys: ThinkPad/Access IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute, Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12). If you are not sure, say Y here. The driver enables polling only if it is strictly necessary to do so. config THINKPAD_LMI tristate "Lenovo WMI-based systems management driver" depends on ACPI_WMI select FW_ATTR_CLASS help This driver allows changing BIOS settings on Lenovo machines whose BIOS support the WMI interface. To compile this driver as a module, choose M here: the module will be called think-lmi. source "drivers/platform/x86/intel/Kconfig" config MSI_LAPTOP tristate "MSI Laptop Extras" depends on ACPI depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL depends on INPUT && SERIO_I8042 select INPUT_SPARSEKMAP help This is a driver for laptops built by MSI (MICRO-STAR INTERNATIONAL): MSI MegaBook S270 (MS-1013) Cytron/TCM/Medion/Tchibo MD96100/SAM2000 It adds support for Bluetooth, WLAN and LCD brightness control. More information about this driver is available at <http://0pointer.de/lennart/tchibo.html>. If you have an MSI S270 laptop, say Y or M here. config MSI_WMI tristate "MSI WMI extras" depends on ACPI_WMI depends on INPUT depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP help Say Y here if you want to support WMI-based hotkeys on MSI laptops. To compile this driver as a module, choose M here: the module will be called msi-wmi. config XO15_EBOOK tristate "OLPC XO-1.5 ebook switch" depends on OLPC || COMPILE_TEST depends on ACPI && INPUT help Support for the ebook switch on the OLPC XO-1.5 laptop. This switch is triggered as the screen is rotated and folded down to convert the device into ebook form. config XO1_RFKILL tristate "OLPC XO-1 software RF kill switch" depends on OLPC || COMPILE_TEST depends on RFKILL help Support for enabling/disabling the WLAN interface on the OLPC XO-1 laptop. config PCENGINES_APU2 tristate "PC Engines APUv2/3 front button and LEDs driver" depends on INPUT && INPUT_KEYBOARD && GPIOLIB depends on LEDS_CLASS select GPIO_AMD_FCH select KEYBOARD_GPIO_POLLED select LEDS_GPIO help This driver provides support for the front button and LEDs on PC Engines APUv2/APUv3 board. To compile this driver as a module, choose M here: the module will be called pcengines-apuv2. config SAMSUNG_LAPTOP tristate "Samsung Laptop driver" depends on RFKILL || RFKILL = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on BACKLIGHT_CLASS_DEVICE select LEDS_CLASS select NEW_LEDS help This module implements a driver for a wide range of different Samsung laptops. It offers control over the different function keys, wireless LED, LCD backlight level. It may also provide some sysfs files described in <file:Documentation/ABI/testing/sysfs-driver-samsung-laptop> To compile this driver as a module, choose M here: the module will be called samsung-laptop. config SAMSUNG_Q10 tristate "Samsung Q10 Extras" depends on ACPI select BACKLIGHT_CLASS_DEVICE help This driver provides support for backlight control on Samsung Q10 and related laptops, including Dell Latitude X200. config ACPI_TOSHIBA tristate "Toshiba Laptop Extras" depends on ACPI depends on ACPI_WMI select LEDS_CLASS select NEW_LEDS depends on BACKLIGHT_CLASS_DEVICE depends on INPUT depends on SERIO_I8042 || SERIO_I8042 = n depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL || RFKILL = n depends on IIO select INPUT_SPARSEKMAP help This driver adds support for access to certain system settings on "legacy free" Toshiba laptops. These laptops can be recognized by their lack of a BIOS setup menu and APM support. On these machines, all system configuration is handled through the ACPI. This driver is required for access to controls not covered by the general ACPI drivers, such as LCD brightness, video output, etc. This driver differs from the non-ACPI Toshiba laptop driver (located under "Processor type and features") in several aspects. Configuration is accessed by reading and writing text files in the /proc tree instead of by program interface to /dev. Furthermore, no power management functions are exposed, as those are handled by the general ACPI drivers. More information about this driver is available at <http://memebeam.org/toys/ToshibaAcpiDriver>. If you have a legacy free Toshiba laptop (such as the Libretto L1 series), say Y. config TOSHIBA_BT_RFKILL tristate "Toshiba Bluetooth RFKill switch support" depends on ACPI depends on RFKILL || RFKILL = n help This driver adds support for Bluetooth events for the RFKill switch on modern Toshiba laptops with full ACPI support and an RFKill switch. This driver handles RFKill events for the TOS6205 Bluetooth, and re-enables it when the switch is set back to the 'on' position. If you have a modern Toshiba laptop with a Bluetooth and an RFKill switch (such as the Portege R500), say Y. config TOSHIBA_HAPS tristate "Toshiba HDD Active Protection Sensor" depends on ACPI help This driver adds support for the built-in accelerometer found on recent Toshiba laptops equipped with HID TOS620A device. This driver receives ACPI notify events 0x80 when the sensor detects a sudden move or a harsh vibration, as well as an ACPI notify event 0x81 whenever the movement or vibration has been stabilized. Also provides sysfs entries to get/set the desired protection level and resetting the HDD protection interface. If you have a recent Toshiba laptop with a built-in accelerometer device, say Y. config TOSHIBA_WMI tristate "Toshiba WMI Hotkeys Driver (EXPERIMENTAL)" depends on ACPI_WMI depends on INPUT select INPUT_SPARSEKMAP help This driver adds hotkey monitoring support to some Toshiba models that manage the hotkeys via WMI events. WARNING: This driver is incomplete as it lacks a proper keymap and the *notify function only prints the ACPI event type value. Be warned that you will need to provide some information if you have a Toshiba model with WMI event hotkeys and want to help with the development of this driver. If you have a WMI-based hotkeys Toshiba laptop, say Y or M here. config ACPI_CMPC tristate "CMPC Laptop Extras" depends on ACPI && INPUT depends on RFKILL || RFKILL=n select BACKLIGHT_CLASS_DEVICE help Support for Intel Classmate PC ACPI devices, including some keys as input device, backlight device, tablet and accelerometer devices. config COMPAL_LAPTOP tristate "Compal (and others) Laptop Extras" depends on ACPI depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO || ACPI_VIDEO = n depends on RFKILL depends on HWMON depends on POWER_SUPPLY help This is a driver for laptops built by Compal, and some models by other brands (e.g. Dell, Toshiba). It adds support for rfkill, Bluetooth, WLAN, LCD brightness, hwmon and battery charging level control. config LG_LAPTOP tristate "LG Laptop Extras" depends on ACPI depends on ACPI_WMI depends on INPUT select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS help This driver adds support for hotkeys as well as control of keyboard backlight, battery maximum charge level and various other ACPI features. If you have an LG Gram laptop, say Y or M here. config PANASONIC_LAPTOP tristate "Panasonic Laptop Extras" depends on INPUT && ACPI depends on BACKLIGHT_CLASS_DEVICE depends on ACPI_VIDEO=n || ACPI_VIDEO depends on SERIO_I8042 || SERIO_I8042 = n select INPUT_SPARSEKMAP help This driver adds support for access to backlight control and hotkeys on Panasonic Let's Note laptops. If you have a Panasonic Let's note laptop (such as the R1(N variant), R2, R3, R5, T2, W2 and Y2 series), say Y. config SONY_LAPTOP tristate "Sony Laptop Extras" depends on ACPI depends on ACPI_VIDEO || ACPI_VIDEO = n depends on BACKLIGHT_CLASS_DEVICE depends on INPUT depends on RFKILL help This mini-driver drives the SNC and SPIC devices present in the ACPI BIOS of the Sony Vaio laptops. It gives access to some extra laptop functionalities like Bluetooth, screen brightness control, Fn keys and allows powering on/off some devices. Read <file:Documentation/admin-guide/laptops/sony-laptop.rst> for more information. config SONYPI_COMPAT bool "Sonypi compatibility" depends on SONY_LAPTOP help Build the sonypi driver compatibility code into the sony-laptop driver. config SYSTEM76_ACPI tristate "System76 ACPI Driver" depends on ACPI select NEW_LEDS select LEDS_CLASS select LEDS_TRIGGERS help This is a driver for System76 laptops running open firmware. It adds support for Fn-Fx key combinations, keyboard backlight, and airplane mode LEDs. If you have a System76 laptop running open firmware, say Y or M here. config TOPSTAR_LAPTOP tristate "Topstar Laptop Extras" depends on ACPI depends on INPUT select INPUT_SPARSEKMAP select LEDS_CLASS select NEW_LEDS help This driver adds support for hotkeys found on Topstar laptops. If you have a Topstar laptop, say Y or M here. config SERIAL_MULTI_INSTANTIATE tristate "Serial bus multi instantiate pseudo device driver" depends on I2C && SPI && ACPI help Some ACPI-based systems list multiple devices in a single ACPI firmware-node. This driver will instantiate separate clients for each device in the firmware-node. To compile this driver as a module, choose M here: the module will be called serial-multi-instantiate. config MLX_PLATFORM tristate "Mellanox Technologies platform support" depends on I2C select REGMAP help This option enables system support for the Mellanox Technologies platform. The Mellanox systems provide data center networking solutions based on Virtual Protocol Interconnect (VPI) technology enable seamless connectivity to 56/100Gb/s InfiniBand or 10/40/56GbE connection. If you have a Mellanox system, say Y or M here. config TOUCHSCREEN_DMI bool "DMI based touchscreen configuration info" depends on ACPI && DMI && I2C=y && TOUCHSCREEN_SILEAD select EFI_EMBEDDED_FIRMWARE if EFI help Certain ACPI based tablets with e.g. Silead or Chipone touchscreens do not have enough data in ACPI tables for the touchscreen driver to handle the touchscreen properly, as OEMs expect the data to be baked into the tablet model specific version of the driver shipped with the the OS-image for the device. This option supplies the missing info. Enable this for x86 tablets with Silead or Chipone touchscreens. config FW_ATTR_CLASS tristate config INTEL_IMR bool "Intel Isolated Memory Region support" depends on X86_INTEL_QUARK && IOSF_MBI help This option provides a means to manipulate Isolated Memory Regions. IMRs are a set of registers that define read and write access masks to prohibit certain system agents from accessing memory with 1 KiB granularity. IMRs make it possible to control read/write access to an address by hardware agents inside the SoC. Read and write masks can be defined for: - eSRAM flush - Dirty CPU snoop (write only) - RMU access - PCI Virtual Channel 0/Virtual Channel 1 - SMM mode - Non SMM mode Quark contains a set of eight IMR registers and makes use of those registers during its bootup process. If you are running on a Galileo/Quark say Y here. config INTEL_IPS tristate "Intel Intelligent Power Sharing" depends on ACPI && PCI help Intel Calpella platforms support dynamic power sharing between the CPU and GPU, maximizing performance in a given TDP. This driver, along with the CPU frequency and i915 drivers, provides that functionality. If in doubt, say Y here; it will only load on supported platforms. config INTEL_SCU_IPC bool config INTEL_SCU bool select INTEL_SCU_IPC config INTEL_SCU_PCI bool "Intel SCU PCI driver" depends on PCI select INTEL_SCU help This driver is used to bridge the communications between kernel and SCU on some embedded Intel x86 platforms. It also creates devices that are connected to the SoC through the SCU. Platforms supported: Medfield Clovertrail Merrifield Broxton Apollo Lake config INTEL_SCU_PLATFORM tristate "Intel SCU platform driver" depends on ACPI select INTEL_SCU help This driver is used to bridge the communications between kernel and SCU (sometimes called PMC as well). The driver currently supports Intel Elkhart Lake and compatible platforms. config INTEL_SCU_WDT bool default INTEL_SCU_PCI depends on INTEL_MID_WATCHDOG help This is a specific platform code to instantiate watchdog device on ACPI-based Intel MID platforms. config INTEL_SCU_IPC_UTIL tristate "Intel SCU IPC utility driver" depends on INTEL_SCU help The IPC Util driver provides an interface with the SCU enabling low level access for debug work and updating the firmware. Say N unless you will be doing this on an Intel MID platform. endif # X86_PLATFORM_DEVICES config PMC_ATOM def_bool y depends on PCI select COMMON_CLK