0x1949 Team - FAZEMRX - MANAGER

Edit File: Kconfig

# SPDX-License-Identifier: GPL-2.0-only # # Joystick driver configuration # menuconfig INPUT_JOYSTICK bool "Joysticks/Gamepads" depends on !UML help If you have a joystick, 6dof controller, gamepad, steering wheel, weapon control system or something like that you can say Y here and the list of supported devices will be displayed. This option doesn't affect the kernel. Please read the file <file:Documentation/input/joydev/joystick.rst> which contains more information. if INPUT_JOYSTICK config JOYSTICK_ANALOG tristate "Classic PC analog joysticks and gamepads" select GAMEPORT help Say Y here if you have a joystick that connects to the PC gameport. In addition to the usual PC analog joystick, this driver supports many extensions, including joysticks with throttle control, with rudders, additional hats and buttons compatible with CH Flightstick Pro, ThrustMaster FCS, 6 and 8 button gamepads, or Saitek Cyborg joysticks. Please read the file <file:Documentation/input/joydev/joystick.rst> which contains more information. To compile this driver as a module, choose M here: the module will be called analog. config JOYSTICK_A3D tristate "Assassin 3D and MadCatz Panther devices" select GAMEPORT help Say Y here if you have an FPGaming or MadCatz controller using the A3D protocol over the PC gameport. To compile this driver as a module, choose M here: the module will be called a3d. config JOYSTICK_ADC tristate "Simple joystick connected over ADC" depends on IIO select IIO_BUFFER select IIO_BUFFER_CB help Say Y here if you have a simple joystick connected over ADC. To compile this driver as a module, choose M here: the module will be called adc-joystick. config JOYSTICK_ADI tristate "Logitech ADI digital joysticks and gamepads" select GAMEPORT depends on ADI!=m # avoid module name conflict help Say Y here if you have a Logitech controller using the ADI protocol over the PC gameport. To compile this driver as a module, choose M here: the module will be called adi. config JOYSTICK_COBRA tristate "Creative Labs Blaster Cobra gamepad" select GAMEPORT help Say Y here if you have a Creative Labs Blaster Cobra gamepad. To compile this driver as a module, choose M here: the module will be called cobra. config JOYSTICK_GF2K tristate "Genius Flight2000 Digital joysticks and gamepads" select GAMEPORT help Say Y here if you have a Genius Flight2000 or MaxFighter digitally communicating joystick or gamepad. To compile this driver as a module, choose M here: the module will be called gf2k. config JOYSTICK_GRIP tristate "Gravis GrIP joysticks and gamepads" select GAMEPORT help Say Y here if you have a Gravis controller using the GrIP protocol over the PC gameport. To compile this driver as a module, choose M here: the module will be called grip. config JOYSTICK_GRIP_MP tristate "Gravis GrIP MultiPort" select GAMEPORT help Say Y here if you have the original Gravis GrIP MultiPort, a hub that connects to the gameport and you connect gamepads to it. To compile this driver as a module, choose M here: the module will be called grip_mp. config JOYSTICK_GUILLEMOT tristate "Guillemot joysticks and gamepads" select GAMEPORT help Say Y here if you have a Guillemot joystick using a digital protocol over the PC gameport. To compile this driver as a module, choose M here: the module will be called guillemot. config JOYSTICK_INTERACT tristate "InterAct digital joysticks and gamepads" select GAMEPORT help Say Y here if you have an InterAct gameport or joystick communicating digitally over the gameport. To compile this driver as a module, choose M here: the module will be called interact. config JOYSTICK_SIDEWINDER tristate "Microsoft SideWinder digital joysticks and gamepads" select GAMEPORT help Say Y here if you have a Microsoft controller using the Digital Overdrive protocol over PC gameport. To compile this driver as a module, choose M here: the module will be called sidewinder. config JOYSTICK_TMDC tristate "ThrustMaster DirectConnect joysticks and gamepads" select GAMEPORT help Say Y here if you have a ThrustMaster controller using the DirectConnect (BSP) protocol over the PC gameport. To compile this driver as a module, choose M here: the module will be called tmdc. source "drivers/input/joystick/iforce/Kconfig" config JOYSTICK_WARRIOR tristate "Logitech WingMan Warrior joystick" select SERIO help Say Y here if you have a Logitech WingMan Warrior joystick connected to your computer's serial port. To compile this driver as a module, choose M here: the module will be called warrior. config JOYSTICK_MAGELLAN tristate "LogiCad3d Magellan/SpaceMouse 6dof controllers" select SERIO help Say Y here if you have a Magellan or Space Mouse 6DOF controller connected to your computer's serial port. To compile this driver as a module, choose M here: the module will be called magellan. config JOYSTICK_SPACEORB tristate "SpaceTec SpaceOrb/Avenger 6dof controllers" select SERIO help Say Y here if you have a SpaceOrb 360 or SpaceBall Avenger 6DOF controller connected to your computer's serial port. To compile this driver as a module, choose M here: the module will be called spaceorb. config JOYSTICK_SPACEBALL tristate "SpaceTec SpaceBall 6dof controllers" select SERIO help Say Y here if you have a SpaceTec SpaceBall 2003/3003/4000 FLX controller connected to your computer's serial port. For the SpaceBall 4000 USB model, use the USB HID driver. To compile this driver as a module, choose M here: the module will be called spaceball. config JOYSTICK_STINGER tristate "Gravis Stinger gamepad" select SERIO help Say Y here if you have a Gravis Stinger connected to one of your serial ports. To compile this driver as a module, choose M here: the module will be called stinger. config JOYSTICK_TWIDJOY tristate "Twiddler as a joystick" select SERIO help Say Y here if you have a Handykey Twiddler connected to your computer's serial port and want to use it as a joystick. To compile this driver as a module, choose M here: the module will be called twidjoy. config JOYSTICK_ZHENHUA tristate "5-byte Zhenhua RC transmitter" select SERIO select BITREVERSE help Say Y here if you have a Zhen Hua PPM-4CH transmitter which is supplied with a ready to fly micro electric indoor helicopters such as EasyCopter, Lama, MiniCopter, DragonFly or Jabo and want to use it via serial cable as a joystick. To compile this driver as a module, choose M here: the module will be called zhenhua. config JOYSTICK_DB9 tristate "Multisystem, Sega Genesis, Saturn joysticks and gamepads" depends on PARPORT help Say Y here if you have a Sega Master System gamepad, Sega Genesis gamepad, Sega Saturn gamepad, or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. For more information on how to use the driver please read <file:Documentation/input/devices/joystick-parport.rst>. To compile this driver as a module, choose M here: the module will be called db9. config JOYSTICK_GAMECON tristate "Multisystem, NES, SNES, N64, PSX joysticks and gamepads" depends on PARPORT select INPUT_FF_MEMLESS help Say Y here if you have a Nintendo Entertainment System gamepad, Super Nintendo Entertainment System gamepad, Nintendo 64 gamepad, Sony PlayStation gamepad or a Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick connected to your parallel port. For more information on how to use the driver please read <file:Documentation/input/devices/joystick-parport.rst>. To compile this driver as a module, choose M here: the module will be called gamecon. config JOYSTICK_TURBOGRAFX tristate "Multisystem joysticks via TurboGraFX device" depends on PARPORT help Say Y here if you have the TurboGraFX interface by Steffen Schwenke, and want to use it with Multisystem -- Atari, Amiga, Commodore, Amstrad CPC joystick. For more information on how to use the driver please read <file:Documentation/input/devices/joystick-parport.rst>. To compile this driver as a module, choose M here: the module will be called turbografx. config JOYSTICK_AMIGA tristate "Amiga joysticks" depends on AMIGA help Say Y here if you have an Amiga with a digital joystick connected to it. To compile this driver as a module, choose M here: the module will be called amijoy. config JOYSTICK_AS5011 tristate "Austria Microsystem AS5011 joystick" depends on I2C help Say Y here if you have an AS5011 digital joystick connected to your system. To compile this driver as a module, choose M here: the module will be called as5011. config JOYSTICK_JOYDUMP tristate "Gameport data dumper" select GAMEPORT help Say Y here if you want to dump data from your joystick into the system log for debugging purposes. Say N if you are making a production configuration or aren't sure. To compile this driver as a module, choose M here: the module will be called joydump. config JOYSTICK_XPAD tristate "X-Box gamepad support" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use the X-Box pad with your computer. Make sure to say Y to "Joystick support" (CONFIG_INPUT_JOYDEV) and/or "Event interface support" (CONFIG_INPUT_EVDEV) as well. For information about how to connect the X-Box pad to USB, see <file:Documentation/input/devices/xpad.rst>. To compile this driver as a module, choose M here: the module will be called xpad. config JOYSTICK_XPAD_FF bool "X-Box gamepad rumble support" depends on JOYSTICK_XPAD && INPUT select INPUT_FF_MEMLESS help Say Y here if you want to take advantage of xbox 360 rumble features. config JOYSTICK_XPAD_LEDS bool "LED Support for Xbox360 controller 'BigX' LED" depends on JOYSTICK_XPAD && (LEDS_CLASS=y || LEDS_CLASS=JOYSTICK_XPAD) help This option enables support for the LED which surrounds the Big X on XBox 360 controller. config JOYSTICK_WALKERA0701 tristate "Walkera WK-0701 RC transmitter" depends on HIGH_RES_TIMERS && PARPORT help Say Y or M here if you have a Walkera WK-0701 transmitter which is supplied with a ready to fly Walkera helicopters such as HM36, HM37, HM60 and want to use it via parport as a joystick. More information is available: <file:Documentation/input/devices/walkera0701.rst> To compile this driver as a module, choose M here: the module will be called walkera0701. config JOYSTICK_MAPLE tristate "Dreamcast control pad" depends on MAPLE help Say Y here if you have a SEGA Dreamcast and want to use your controller as a joystick. Most Dreamcast users will say Y. To compile this as a module choose M here: the module will be called maplecontrol. config JOYSTICK_PSXPAD_SPI tristate "PlayStation 1/2 joypads via SPI interface" depends on SPI help Say Y here if you wish to connect PlayStation 1/2 joypads via SPI interface. To compile this driver as a module, choose M here: the module will be called psxpad-spi. config JOYSTICK_PSXPAD_SPI_FF bool "PlayStation 1/2 joypads force feedback (rumble) support" depends on JOYSTICK_PSXPAD_SPI select INPUT_FF_MEMLESS help Say Y here if you want to take advantage of PlayStation 1/2 joypads rumble features. To drive rumble motor a dedicated power supply is required. config JOYSTICK_PXRC tristate "PhoenixRC Flight Controller Adapter" depends on USB_ARCH_HAS_HCD select USB help Say Y here if you want to use the PhoenixRC Flight Controller Adapter. To compile this driver as a module, choose M here: the module will be called pxrc. config JOYSTICK_QWIIC tristate "SparkFun Qwiic Joystick" depends on I2C help Say Y here if you want to use the SparkFun Qwiic Joystick. To compile this driver as a module, choose M here: the module will be called qwiic-joystick. config JOYSTICK_FSIA6B tristate "FlySky FS-iA6B RC Receiver" select SERIO help Say Y here if you use a FlySky FS-i6 RC remote control along with the FS-iA6B RC receiver as a joystick input device. To compile this driver as a module, choose M here: the module will be called fsia6b. config JOYSTICK_N64 bool "N64 controller" depends on MACH_NINTENDO64 help Say Y here if you want enable support for the four built-in controller ports on the Nintendo 64 console. endif